Parts for Ideal and American Stitchers
Click on Part Number for Information/Quote. |
| NOTE: parts not listed may still be available, please call us for assistance |
| Part No. |
Description |
Price |
| AA-4 |
L.H. Face Plate complete A-800,A-205,A-320, A-325, A-360 ( Same as AA-800) |
107.55 |
| AA-20-D |
Brake Band |
74.65 |
| AA-20-D-S |
Tempered Steel Brake Band With Lining Only |
86.10 |
| AA-20-D-1 |
Brake Band Complete with A-365-1, A-955 and A-959 |
91.85 |
| AA-20-D-1-S |
Tempered Steel Brake Band with A-365-1, A-955, and A-959 |
93.45 |
| AA-67 |
Clincher Arm Adjusting Knob, 12" & 20", A-67, A-412, and A-413 |
37.30 |
| AA-67-A |
Clincher Arm Adjusting Knob for Thin Arm |
40.90 |
| A-96 |
Connection Washer |
1.80 |
| A-111 |
Dowel Pin |
1.05 |
| A-119 |
Wire Check Pin |
1.80 |
| A-120 |
Check Sleeve |
8.65 |
| A-120-A |
Check Washer |
2.35 |
| A-121 |
Check Pin Retainer |
1.45 |
| A-121-A |
Check Spring Retainer |
1.45 |
| A-129 |
Spool Stud |
19.45 |
| AA-130 |
Tension Tube Complete ( A-130, A-133,A-135, AA-650) |
52.65 |
| A-132 |
Tension Tube Stud |
11.05 |
| A-133 |
Tension Tube Staple |
1.70 |
| A-135 |
Tension Tube Leather |
6.75 |
| A-138 |
Drive Shaft Washer Rear |
10.70 |
| A-138-A |
Shaft Washer for A-699-C |
2.45 |
| AA-139 |
Shaft Bushing Rear, Complete (A-139 & 2 A-167) |
61.35 |
| AA-139-A |
Shaft Bushing Rear Inverted Head with A-167 Pins |
66.50 |
| A-148 |
Brake Shoe Lining |
7.95 |
| A-150 |
Motor Bracket Washer |
2.20 |
| A-157 |
Clutch Shifter Rod Clevis |
16.90 |
| A-158 |
Clutch Shifter Rod Clevis Pin |
8.40 |
| A-165 |
Wire Tension Tube Spring |
10.05 |
| A-167 |
Rear Shaft Bushing Dowel Pin ( 2 required) |
1.55 |
| A-169-A |
Drive Pulley Guard |
192.70 |
| AA-169-A |
Drive Pulley Guard with Cover ( A-169-A, A-911) |
313.75 |
| A-177 |
Cutter Tube Clamp Screw |
1.50 |
| A-205 |
Supporter Plunger Spring Pin |
2.00 |
| B-209 |
Set Collar |
5.55 |
| A-272 |
Cam Guard Hinge Pin |
3.25 |
| A-273 |
Supporter Plunger Set Screw |
1.40 |
| Driver Bar With Pin-----For Use With Driver End---Standard |
| A-300-B2 |
1/4" Crown, 103 Ribbon Wire |
88.35 |
| A-300-B11 |
1/4" Crown, 20x25, Round and .060 Wide Wire |
88.35 |
| A-300-C2 |
5/16" Crown, 103 Ribbon Wire |
88.35 |
| A-300-C11 |
5/16" Crown, 20 x 25 Round and .060 Wide Wire |
88.35 |
| A-300-D2 |
3/8" Crown, 103 Ribbon Wire |
76.75 |
| A-300-D11 |
3/8" Crown, 20x25, Round and .060 Wide Wire |
76.75 |
| A-300-E2 |
7/16" Crown, 103 Ribbon Wire |
72.20 |
| A-300-E11 |
7/16" Crown, 20x25, Round and .060 Wide Wire |
72.20 |
| A-300-F2 |
1/2" Crown, 103 Ribbon Wire |
73.40 |
| A-300-F11 |
1/2" Crown, 20x25, Round and .060 Wide Wire |
119.35 |
| A-300-G2 |
5/8" Crown, 103 Ribbon Wire |
119.35 |
| A-300-G11 |
5/8" Crown, 20x25, Round and .060 Wide Wire |
119.35 |
| A-300-P2 |
1" Crown, .020 x .103 Wire |
162.10 |
| Solid One Piece Driver Bars With Pin--No Driver End Required |
| A-300-U-0 |
1 1/4" Crown, .028 x .103 Wire |
117.60 |
| A-300-U1 |
1 1/4" Crown, .023 x .103 Wire |
117.60 |
| A-300-U2A |
1 1/4" Crown, .020 x .103 Wire, Acurate |
117.60 |
| A-300-U-35 |
1 1/4" Crown, .037 x .074 Wire |
117.60 |
| WSA-8300 |
1 3/8" Crown, .037 x .074 Wire |
117.60 |
| Driver Ends- Standard-Reversible. For Use With A-300 & A-2300 Driver Bars |
| A-301-B1XX |
1/4" Crown, .023 x .103 Wire Concave |
71.45 |
| A-301-B1 |
1/4" Crown, .023 x .103 Wire |
65.85 |
| A-301-B2 |
1/4" Crown, .020 x .103 Wire |
65.85 |
| A-301-B2XX |
1/4" Crown, .020 x .103 Concave |
71.45 |
| A-301-B11 |
1/4" Crown, 20 x 25 Wire |
65.85 |
| A-301-B14 |
1/4" Crown, .060 x .024 Wire |
65.85 |
| A-301-B20 |
1/4" Crown, No. 20 Round Wire |
65.85 |
| A-301-B32 |
1/4" Crown, 19 x 21 1/2 Wire |
65.85 |
| A-301-B34 |
1/4" Crown, .022 x .078 Wire, Glove Stitcher |
65.85 |
| A-301-C2 |
5/16" Crown, .020 x .103 Wire |
71.45 |
| A-301-C11 |
5/16" Crown, 20x25 Wire |
71.45 |
| A-301-C14 |
5/16" Crown, .060 x .024 Wire |
71.45 |
| A-301-C20 |
5/16" Crown, No. 20 Round Wire |
71.45 |
| A-301-C32 |
5/16" Crown, 19 x 21 1/2 Wire |
71.45 |
| A-301-D1 |
3/8" Crown, .023 x .103 Wire |
41.35 |
| A-301-D1XX |
Concave, 3/8" Crown, .023 x .103 Wire |
46.00 |
| A-301-D2 |
3/8" Crown, .017 or .020 x .103 Wire |
46.00 |
| A-301-D2XX |
Concave, 3/8" Crown, .017 or .020 x .103 Wire |
53.25 |
| A-301-D11 |
3/8" Crown, 20 x 25 Wire |
46.00 |
| A-301-D14 |
3/8" Crown, .060 x .024 Wire |
46.00 |
| A-301-D-14XX |
3/8" Crown, Concave .024 x .060 |
53.25 |
| A-301-D32 |
3/8" Crown, 19 x 21 1/2" Wire |
46.00 |
| A-301-E0 |
7/16" Crown, .028 x .103 Wire |
41.90 |
| A-301-E1 |
7/16" Cown, .023 x .103 |
40.35 |
| A-301-E1XX |
Concave, 7/16" Crown .023 x .103 Wire |
45.15 |
| A-301-E2 |
7/16" Crown, .020 or .017 x .103 Wire |
35.60 |
| A-301-E2A |
7/16" Crown, Arcuate, .020 x.103 Wire |
45.45 |
| A-301-E2XX |
Concave, 7/16" Crown, .020 x .103 Wire |
44.00 |
| A-301-E3A |
7/16" Crown, Arcuate, .017 and .014 x .103 Wire |
45.45 |
| A-301-E4XX |
Concave, 7/16" Crown, .014 x .103 Wire |
52.65 |
| A-301-E11 |
7/16" Crown, 20 x 25 Wire |
51.65 |
| A-301-E14 |
7/16" Crown, .060 Wide HyBar Wire |
51.65 |
| A-301-E14XX |
7/16" Crown, .060 Concave |
52.95 |
| A-301-E18 |
7/16" Crown, 18 Round Wire |
51.65 |
| A-301-E32 |
7/16" Crown, 19 x 21 1/2" Wire |
51.65 |
| A-301-F1 |
1/2" Crown, .023 x .103 Wire |
51.65 |
| A-301-F1XX |
Concave, 1/2" Crown, .023 x .103 Wire |
57.45 |
| A-301-F2 |
1/2" Crown, .020 x .103 Wire |
49.60 |
| A-301-F2XX |
Concave, 1/2" Crown, .020 x .103 Wire |
45.10 |
| A-301-F11 |
1/2" Crown, 20 x25 Wire |
52.65 |
| A-301-F14 |
1/2" Crown, .060 Wide Hybar Wire |
49.65 |
| A-301-F18 |
1/2" Crown, 18 Round Wire |
56.02 |
| A-301-G2 |
5/8" Crown, .020 x .103 Wire |
71.45 |
| A-301-P2 |
1" Crown, No. 20 Round Wire |
118.00 |
| Standard Former Legs, Right Hand For Use with Former Plunger in Former Housing |
| A-302-B2 |
1/4" Crown, .020 x .103 Wire |
66.70 |
| A-302-B11 |
1/4" Crown, 20 x 25 Wire |
66.70 |
| A-302-B14 |
1/4" Crown, .060 Wide HyBar Wire |
66.70 |
| A-302-B20 |
1/4" Crown, No. 20 Round Wire |
71.45 |
| A-302-B32 |
1/4" Crown, 19 x 21 1/2 Wire |
66.70 |
| A-302-B34 |
1/4" Crown, .022 x .078 Wire |
66.70 |
| A-302-C2 |
5/16" Crown, .020 x .103 Wire |
72.20 |
| A-302-C11 |
5/16" Crown, 20x25 Wire |
72.20 |
| A-302-C14 |
5/16" Crown, .060 Wide HyBar Wire |
72.20 |
| A-302-C32 |
5/16" Crown, 19 x 21 1/2 Wire |
72.20 |
| A-302-D1 |
3/8" Crown, .023 x .103 Wire |
58.65 |
| A-302-D2 |
3/8" Crown, .020 x .103 Wire |
58.64 |
| A-302-D11 |
3/8" Crown, 20 x 25 Wire |
58.65 |
| A-302-D14 |
3/8" Crown, .060 Wide hyBar Wire |
58.65 |
| A-302-D18 |
3/8" Crown, 18 Round Wire |
62.80 |
| A-302-D32 |
3/8" Crown, 19 x 21 1/2" Wire |
58.65 |
| A-302-E0 |
7/16" Crown, .028 x .103 Wire |
41.55 |
| A-302-E1 |
7/16" Crown, .023 x .103 Wire |
38.40 |
| A-302-E2 |
7/16" Crown, .020 x .103 Wire |
38.40 |
| A-302-E2A |
7/16" Crown, .020 x .103 Wire Only, Arcuate |
41.55 |
| A-302-E3A |
7/16" Crown, .014 or .017 Wire, Arcuate |
41.55 |
| A-302-E11 |
7/16" Crown, 20x25 Wire |
41.55 |
| A-302-E14 |
7/16" Crown, .060 Wide HyBar Wire |
41.55 |
| A-302-E18 |
7/16" Crown, No.18 Round Wire |
66.70 |
| A-302-E20 |
7/16" Crown, No.20 Round Wire |
66.70 |
| A-302-E32 |
7/16" Crown, 19 x 21 1/2" Wire |
48.85 |
| A-302-F1 |
1/2" Crown, .023 x .103 Wire |
41.55 |
| A-302-F2 |
1/2" Crown, .020 x .103 Wire |
41.55 |
| A-302-F11 |
1/2" Crown, 20x25 Wire |
48.85 |
| A-302-F14 |
1/2" Crown, .060 Wide Hybar Wire |
48.85 |
| A-302-F18 |
1/2" Crown, No.18 Round Wire |
66.70 |
| A-302-G2 |
5/8" Crown, .020 x .103 Wire |
72.65 |
| Special Former Legs, Right Hand- Made to Incorporate A-313 Stub Type Former Plunger in Them. Used on Glove Stitchers and other special applications. |
| A-302-1-B2 |
1/4" Crown, .020 x .103 |
85.55 |
| A-302-1-B11 |
1/4" Crown, 20 x 25 Wire |
85.55 |
| A-302-1-B14 |
1/4" Crown, .060 Wide HyBar Wire |
85.55 |
| A-302-1-B20 |
1/4" Crown, No.20 Round Wire |
85.55 |
| A-302-1-B32 |
1/4" Crown, 19 x 21-1/2 Wire |
85.55 |
| A-302-1-C2 |
5/16" Crown, .020 x .103 Wire |
85.55 |
| A-302-1-C11 |
5/16" Crown, 20 x25 Wire |
85.55 |
| A-302-1-C14 |
5/16" Crown, .060 Wide HyBar Wire |
85.55 |
| A-302-1-C32 |
5/16" Crown, 19 x 21-1/2 Wire |
85.55 |
| Standard Former Leg, Left Hand- For Use with standard cutter blades A-304 |
| A-303-B2 |
1/4" Crown, .020 x .103 Wire |
68.25 |
| A-303-B11 |
1/4" Crown, 20 x 25 Wire |
68.25 |
| A-303-B14 |
1/4" Crown, .060 Wide HyBar Wire |
68.25 |
| A-303-B20 |
1/4" Crown, No.20 Round Wire |
73.05 |
| A-303-B32 |
1/4" Crown, 19 x 21 1/2 Wire |
68.25 |
| A-303-B34 |
1/4" Crown, .022 x .078 Wire |
68.25 |
| A-303-C2 |
5/16" Crown, .020 x .103 Wire |
76.10 |
| A-303-C11 |
5/16" Crown, 20 x 25 Wire |
76.10 |
| A-303-C14 |
5/16" Crown, .060 Wide HyBar Wire |
76.10 |
| A-303-C32 |
5/16" Crown, 19 x 21 1/2 Wire |
76.10 |
| A-303-D1 |
3/8" Crown, .023 x .103 Wire |
59.65 |
| A-303-D2 |
3/8" Crown, .020 x .103 Wire |
59.65 |
| A-303-D11 |
3/8" Crown, 20x25 Wire |
59.65 |
| A-303-D14 |
3/8" Crown, 20x25 Wire |
59.65 |
| A-303-D18 |
3/8" Crown, 18 Round Wire |
67.70 |
| A-303-D32 |
3/8" Crown. 19x 21-1/2 Wire |
59.65 |
| A-303-E0 |
7/16" Crown, .028 x .103 Wire |
43.95 |
| A-303-E1 |
7/16" Crown, .023 x .103 Wire |
37.95 |
| A-303-E2 |
7/16" Crown, .020x.103 Wire |
36.30 |
| A-303-E2A |
7/16" Crown, .020x.103 Wire Only, Arcuate |
42.85 |
| A-303-E3A |
7/16" Crown, .014 or .017 x .103 Wire, Arcuate |
42.85 |
| A-303-E11 |
7/16" Crown, 20x25 Wire |
43.65 |
| A-303-E14 |
7/16" Crown, .060 Wide HyBar Wire |
43.65 |
| A-303-E18 |
7/16" Crown, No.18 Round Wire |
65.40 |
| A-303-E20 |
7/16" Crown, No.20 Round Wire |
65.40 |
| A-303-E32 |
7/16" Crown, 19 x 21 1/2" Wire |
51.00 |
| A-303-F1 |
1/2" Crown, .023 x .103 Wire |
44.05 |
| A-303-F2 |
1/2" Crown, .020 x .103 Wire |
44.05 |
| A-303-F11 |
1/2" Crown, 20x25 Wire |
44.05 |
| A-303-F14 |
1/2" Crown, .060 Wide Hybar Wire |
44.05 |
| A-303-F18 |
1/2" Crown, No.18 Round Wire |
65.40 |
| A-303-G2 |
5/8" Crown, .020 x .103 Wire |
76.50 |
| Special Fromer Legs, Left Hand-For Use With Non-Reversible Cutter Blades A-304-4 |
| A-303-1-B2 |
1/4" Crown, .020x.103 Wire |
88.75 |
| A-303-1-B11 |
1/4" Crown, 20x25 Wire |
88.75 |
| A-303-1-B14 |
1/4" Crown, .060 Wide HyBar Wire |
88.75 |
| A-303-1-B20 |
1/4" Crown, No.20 Round Wire |
88.75 |
| A-303-1-B-32 |
1/4" Crown, 19 x 21 1/2 Wire |
88.75 |
| A-303-1-C2 |
5/16" Crown, .020 x .103 Wire |
88.75 |
| A-303-1-C11 |
5/16" Crown, 20x25 Wire |
88.75 |
| A-303-1-C14 |
5/16" Crown, .060 Wide HyBar Wire |
88.75 |
| A-303-1-C32 |
5/16" Crown, 19 x 21 1/2 Wire |
88.75 |
| Standard Cutter Blades-Used on Standard R.H or L.H Heads- All are Reversible. |
| A-304-1/16 |
1/16" Thick |
14.75 |
| A-304-3/32 |
3/32" Thick |
14.75 |
| A-304-1/8 |
1/8" Thick |
9.85 |
| A-304-3/16 |
3/16" Thick |
9.75 |
| A-304-1/4 |
1/4" Thick |
9.65 |
| A-304-5/16 |
5/16" Thick |
30.50 |
| A-304-3/8 |
3/8" Thick |
36.65 |
| A-304-7/16 |
7/16" Thick |
63.50 |
| A-304-1/2 |
1/2" Thick |
67.50 |
| Cutter Blades For Use With Arched Wire, 7/16" Crown Only- All Are Reversible |
| A-304-A-1/8 |
1/8" Thick, Arcuate |
19.45 |
| A-304-A-3/16 |
3/16" Thick, Arcuate |
19.45 |
| A-304-A-1/4 |
1/4" Thick, Arcuate |
20.30 |
| A-304-A-9/32 |
7/32" Thick, Arcuate |
25.60 |
| A-304-A-5/16 |
5/16" Thick, Arcuate |
44.95 |
| A-304-A-3/8 |
3/8" Thick, Arcuate |
48.95 |
| A-304-A-7/16 |
7/16" Thick, Arcuate |
74.35 |
| Cutter Blades For Ise With Arched Wire, 1 1/4" Crown Only- All Are Reversible |
| UA-304-A-3/16 |
3/16" Thick, Same As 110-563 |
29.05 |
| UA-304-A-1/4 |
1/4" Thick, Same As 110-569 |
29.05 |
| Cutter Blades, Angle Cut Off |
| A-304-Z-3/16 |
3/16" Thick, Angle Cut Off 30 Degrees |
59.35 |
| A-304-Z-1/4 |
1/4" Thick, Angle Cut Off 30 Degrees |
59.35 |
| A-304-Z-5/16 |
5/16" Thick, Angle Cut Off 30 Degrees |
87.80 |
| A-304-Z-3/8 |
3/8" Thick, Angle Cut Off 45 Degrees |
87.80 |
| Cutter Blades, Non-Reversible, For Use With A-303-1 Former Legs For Glove Stitching Machines and Special Application |
| A-304-4-1/16 |
1/16" Thick |
44.95 |
| A-304-4-3/32 |
3/32" Thick |
44.95 |
| A-304-4-1/8 |
1/8" Thick |
40.45 |
| A-304-4-5/32 |
5/32" Thick |
40.45 |
| A-304-4-3/16 |
3/16" Thick |
40.45 |
| A-304-4-7/32 |
7/32" Thick |
42.55 |
| A-304-1/4 |
1/4" Thick |
42.55 |
| A-304-4-9/32 |
9/32" Thick |
44.95 |
| A-304-4-5/16 |
5/16" Thick |
44.95 |
| A-304-4-11/32 |
11/32" Thick |
46.75 |
| A-304-4-3/8 |
3/8" Thick |
46.75 |
| A-304-4-7/16 |
7/16" Thick |
63.50 |
| A-304-4-1/2 |
1/2" Thick |
67.50 |
| Anvils, For Use On Standard L.H Head ( For R.H Head See A-370 Anvils |
| A-305-B2 |
1/4" Crown, .020 x .103 Wire |
84.00 |
| A-305-B11 |
1/4" Crown, 20 x 25 Wire |
84.00 |
| A-305-B14 |
1/4" Crown, .060 Wide HyBar Wire |
84.00 |
| A-305-B20 |
1/4" Crown, No.20 Round Wire, Straight |
83.60 |
| A-305-B20R |
1/4" Crown, No.20 Round Wire, Radius |
108.80 |
| A-305-B21 |
1/4" Crown, 19 x 21 1/2 Wire |
84.00 |
| A-305-B34 |
1/4" Crown, .022 x .078 Wire |
84.00 |
| A-305-C2 |
5/16" Crown, .020 x .103 Wire |
84.00 |
| A-305-C11 |
5/16" Crown, 20 x 25 Wire |
84.00 |
| A-305-C14 |
5/16" Crown, .060 Wide HyBar Wire |
84.00 |
| A-305-C20 |
5/16" Crown, No.20 Round Wire, Straight |
90.10 |
| A-305-C32 |
5/16" Crown, 19 x 21 1/2 Wire |
84.00 |
| A-305-D2 |
3/8" Crown, .020 x .103 Wire |
59.45 |
| A-305-D11 |
3/8" Crown, 20x25 Wire |
59.45 |
| A-305-D14 |
3/8" Crown, .060 Wide hyBar Wire |
59.45 |
| A-305-DX14 |
3/8" Crown, .060 Wide HyBar Wire for Use with Gripper Pin ( A-1065) |
84.00 |
| A-305-D18 |
3/8" Crown, 18 Round Wire |
82.05 |
| A-305-D32 |
3/8" Crown, 19 x 21 1/2" Wire |
59.45 |
| A-305-E2 |
7/16" Crown, .028 to .028 x .103 Wire |
49.05 |
| A-305-E2A |
7/16" Crown, .020 to .028 x .103 Wire, Arcuate |
52.35 |
| A-305-E11 |
7/16" Crown, 20 x 25 Wire |
59.45 |
| A-305-E14 |
7/16" Crown, .060 Wide HyBar Wire |
59.45 |
| A-305-E18 |
7/16" Crown, No.18 Round Wire |
82.05 |
| A-305-E20 |
7/16" Crown, No.20 Round Wire |
82.05 |
| A-305-E32 |
7/16" Crown, 19 x 21-1/2" Wire |
57.70 |
| A-305-F2 |
1/2" Crown, Ribbon Wire |
51.60 |
| A-305-F11 |
1/2" Crown, 20 x25 Wire |
58.95 |
| A-305-F14 |
1/2" Crown, .060 Wide Hybar Wire |
58.95 |
| A-305-F18 |
1/2" Crown, No.18 Round Wire |
82.05 |
| A-305-G2 |
5/8" Crown, Ribbon Wire |
129.00 |
| A-305-P2 |
1" Crown, .020 x .103 Wire |
184.75 |
| A-305-U2A |
1 1/4" Crown, .020 x .103 Wire, Acurate |
85.00 |
| A-305-U-35 |
1 1/4" Crown, .037 x .074 Wire |
85.00 |
| A-306 |
Drive Pins |
5.25 |
| A-306-A |
Eccentric Driver Pin |
37.15 |
| A-307 |
Driver Connection |
31.25 |
| AA-307-A |
Adjustable Drive Connection (Use Also For Twin Head) |
130.90 |
| A-308 |
Supporter Pin |
1.70 |
| Supporters |
| A-309-B |
1/4" Crown |
32.25 |
| A-309-C |
5/16" Crown |
32.25 |
| A-309-D |
3/8" Crown |
32.25 |
| A-309-E |
7/16" Crown |
21.25 |
| A-309-F |
1/2" Crown |
24.60 |
| A-309-G |
5/8" Crown |
44.55 |
| A-309-P |
1" Crown |
88.95 |
| A-309-U |
1 1/4" Crown |
61.20 |
| A-310 |
Former Roller |
8.05 |
| A-311 |
Former Roller Pin |
12.60 |
| A-312 |
Former Plunger Screw |
2.40 |
| Former Plungers, Standard, For Use With A-315 Fromer Housings |
| A-313-B2 |
1/4" Crown, .020 x.103 Wire |
51.85 |
| A-313-B11 |
1/4" Crown, Round and 20 x 25 Wire |
51.00 |
| A-313-B14 |
1/4" Crown, .060 Wide Hybar Wire |
59.00 |
| A-313-C2 |
5/16" Crown, .020 x .103 Wire |
51.85 |
| A-313-C11 |
5/16" Crown, Round and 20 x 25 Wire |
51.00 |
| A-313-C14 |
5/16" Crown, .060 Wide Hybar Wire |
59.10 |
| A-313-C20 |
5/16" Crown, No.20 Round Wire |
59.10 |
| A-313-D2 |
3/8" Crown, .020 x .103 Wire |
35.45 |
| A-313-D11 |
3/8" Crown, Round and 20 x25 Wire |
35.45 |
| A-313-D14 |
3/8" Crown, .060 Wide Hybar Wire |
35.45 |
| A-313-E2 |
7/16" Crown, Ribbon Wire |
13.85 |
| A-313-E11 |
7/16" Crown, Round and 20 x 25 Wire |
20.80 |
| A-313-E14 |
7/16" Crown, .060 Wide Hybar Wire |
20.80 |
| A-313-F2 |
1/2" Crown, Ribbon Wire |
21.05 |
| A-313-F11 |
1/2" Crown, Round and 20 x25 Wire |
21.65 |
| A-313-F14 |
1/2" Crown, .060 Wide Hybar Wire |
21.65 |
| A-313-G2 |
5/8" Crown, .020 x .103 Wire |
38.55 |
| Special Former Plungers, 5/32" Diameter Shank Type Without Head |
| A-313-1-2 |
.103 Wire |
35.85 |
| A-313-1-11 |
20 x25 and 19 x 21-1/2" Wire |
35.85 |
| A-313-1-14 |
.060 Wide Hybar Wire |
35.85 |
| A-313-1-34 |
.022 x .078 Wire |
35.85 |
| A-314 |
Former Plunger Spring |
1.65 |
| Former Housings or One Piece Formers For Use In Standard Machines |
| A-315 |
Former Housing With Roller and pin for 3/8, 7/16, and 1/2" Standard L.H Head |
147.00 |
| A-315-A |
Former Housing With Roller and Pin for 5/16" Crown and Under, Standard L.H Head |
168.45 |
| A-315-G |
Former Housing With Roller and Pin 5/8" Crown |
168.45 |
| A-315-P2 |
Former Housing Complete With Pin And Roller, 1" Crown .020x.103 Wire |
P.O.R |
| A-315-U-0 |
Former One Piece Construction With Flat Wire Grooves 1 1/4" Crown .028x.103 Wire |
222.30 |
| A-315-U-1 |
Former One Piece Construction With Flat Wire Grooves 1 1/4" Crown .020x.103 Wire |
231.25 |
| A-315-U2A |
Former One Piece Construction, Arched Wire Grooves, 1 1/4" Crown .020x.103 Wire |
222.30 |
| A-315-U-35 |
Former, One Piece Construction, 1 1/4" Crown, .037x.074 Wire |
231.20 |
| UA-315-U-1 |
Former, 1 1/4" Crown Arc, .023x.103 Wire |
222.30 |
| Standard Former and Driver Assemblies (Consists of part #"s A-300, A-301, A-302, A-303, A-304,A-308, A-309,A-310,A-311, A-312, A-313, A-314 and A-315 Former Housing Which Incorporates The Former Plunger. |
| AA-315-B2 |
1/4" Crown, .020 x.103 Wire |
557.45 |
| AA-315-B11 |
1/4" Crown, 20x25 Wire |
557.45 |
| AA-315-B14 |
1/4" Crown, .060 Wide Hybar Wire |
557.45 |
| AA-315-B20 |
1/4" Crown, No.20 Round Wire |
566.80 |
| AA-315-B32 |
1/4" Crown, 19x 21-1/2 Wire |
557.45 |
| AA-315-B34 |
1/4" Crown, .022x.078 Wire |
557.45 |
| AA-315-C2 |
5/16" Crown, .020x.103 Wire |
576.90 |
| AA-315-C11 |
5/16" Crown, Round and 20 x 25 Wire |
576.90 |
| AA-315-C14 |
5/16" Crown, .060 Wide Hybar Wire |
576.90 |
| AA-315-C20 |
5/16" Crown, No.20 Round Wire |
576.90 |
| AA-315-C32 |
5/16" Crown, 19 x 21-1/2 Wire |
576.90 |
| AA-315-D2 |
3/8" Crown, .020x.103 Wire |
492.05 |
| AA-315-D11 |
3/8" Crown, 20x25 Wire |
492.05 |
| AA-315-D14 |
3/8" Crown, .060 Wide Hybar Wire |
492.05 |
| AA-315-E0 |
7/16" Crown, .028x.103 Wire |
418.90 |
| AA-315-E1 |
7/16" Crown, .023x.103 Wire |
410.40 |
| AA-315-E2 |
7/16" Crown, .020x.103 Wire |
376.65 |
| AA-315-E2A |
7/16" Crown, .020x.103 Arcuate Wire |
432.00 |
| AA-315-E2XX |
7/16" Crown, .020x.103 Wire Concave Driver End |
415.20 |
| AA-315-E3A |
7/16" Crown, .014 and .017x.103 Arcuate Wire |
432.00 |
| AA-315-E4 |
7/16" Crown, .014x.103 Wire |
405.65 |
| AA-315-E11 |
7/16" Crown, 20x25 Wire |
435.05 |
| AA-315-E14 |
7/16" Crown, .060 Wide Hybar Wire |
435.05 |
| AA-315-E18 |
7/16" Crown, No.18 Round Wire |
484.30 |
| AA-315-E20 |
7/16" Crown, No.20 Round Wire |
484.30 |
| AA-315-E32 |
7/16" Crown, 19 x 21-1/2 Wire |
484.30 |
| AA-315-F1 |
1/2" Crown, .023x.103 Wire |
437.60 |
| AA-315-F2 |
1/2" Crown, .020x.103 Wire |
437.60 |
| AA-315-F11 |
1/2" Crown, 20x25 Wire |
449.65 |
| AA-315-F14 |
1/2" Crown, .060 Wide Hybar Wire |
449.65 |
| AA-315-F18 |
1/2" Crown, No.18 Round Wire |
491.75 |
| AA-315-G2 |
5/8"Crown, .020x.103 Wire |
629.70 |
| AA-315-U0 |
1 1/4" Crown, .028x.103 Flat Wire With Supporter |
405.65 |
| AA-315-U1 |
1 1/4" Crown, .023x.103, Flat Wire With Supporter |
414.75 |
| AA-315-U2A |
1 1/4" Crown, .020x.103 Arcuate Wire With Supporter |
405.75 |
| AA-315-U-35 |
1 1/4" Crown, .037x.074 Wire With Supporter |
414.75 |
| Narrow Crown Formers and Drivers. (Includes Part #"s A-300, A-301, A-302-1, A-303-1, A-304-4, A-308, A-309,A-310, A-311, A-312, A-313, A-313-1, A-314 and A-315-A Former Housing With Web Section On Left Side Of Former Housing Cut Out For Cutter Tube Clearance. |
| AA-315-1-B1 |
1/4" Crown, .023x.103 Wire |
587.15 |
| AA-315-1-B2 |
1/4" Crown, .020 x.103 Wire |
587.15 |
| AA-315-1-B11 |
1/4" Crown, 20x25 Wire |
587.15 |
| AA-315-1-B14 |
1/4" Crown, .060 Wide Hybar Wire |
587.15 |
| AA-315-1-B20 |
1/4" Crown, No.20 Round Wire |
587.15 |
| AA-315-1-B32 |
1/4" Crown, 19x 21-1/2 Wire |
587.15 |
| AA-315-1-B34 |
1/4" Crown, .022x.078 Wire |
587.15 |
| AA-315-1-C2 |
5/16" Crown, .020x.103 Wire |
599.35 |
| AA-315-1-C11 |
5/16" Crown, 20x25 Wire |
599.35 |
| AA-315-1-C14 |
5/16" Crown, .060 Wide Hybar Wire |
599.35 |
| AA-315-1-C32 |
5/16" Crown, 19 x 21-1/2 Wire |
599.35 |
| Cutter Tubes |
| A-316-0-3 |
.035x.103 Wire |
35.20 |
| A-316-2 |
.017x.103, .020x.103, and .023x.103 |
7.95 |
| AA-316-2A |
.014x.103, .017x.103, and .020x.103 Arcuate Wire |
26.70 |
| A-316-2Z |
Ribbon Wire, Slant Cut Off |
29.70 |
| A-316-11 |
20x25 and 19x 21-1/2 Wire |
31.35 |
| A-316-14 |
.060 Wide Hybar Wire |
29.70 |
| A-316-14Z |
.060 Wide Hybar Wire, Slant Cut Off |
32.20 |
| A-316-18 |
18 Round Wire |
29.70 |
| A-316-18Z |
18 Round Wire, Slant Cut Off |
31.35 |
| A-316-34 |
.022x.078 Wire |
29.75 |
|
| A-317 |
Cutter Tube Clamp |
11.05 |
| A-317-A |
Cutter Tube For Right Hand Head |
11.05 |
| A-320 |
Supporter Plunger Pivot Pin |
2.00 |
| A-322 |
Anvil Spring Plate |
5.75 |
| A-325 |
Supporter Plunger |
25.95 |
| A-326-A |
R.H Feed Wheel ( Same as A-326-B) |
39.05 |
| A-326-B |
Same As A-326-A |
39.05 |
| A-336-2 |
Wire Check Body Only, Ribbon Wire |
21.35 |
| AA-336-2 |
Wire Check Complete, .020x.103 |
38.55 |
| A-336-11 |
Wire Check Body 20x25 Wire |
31.20 |
| A-336-14 |
Wire Check Body Only, Round and .060 Wide Hybar Wire |
20.85 |
| AA-336-14 |
Wire Check Complete, Round and .060 Wide Hybar Wire |
40.45 |
| A-337 |
Wire Check Spring |
1.70 |
| A-338 |
Feed Wheel Washer, R.H |
2.75 |
| A-339 |
Feed Wheel Washer, L.H |
2.10 |
| A-340 |
R.H Feed Wheel Shaft, Hardened and Ground, with A-351 Pin |
32.55 |
| A-340-A |
R.H Feed Wheel Shaft, Hardened and Ground, with A-351 Pin |
32.55 |
| A-340-C |
R.H Feed Wheel Shaft For Twin Head (American A-1007) |
93.40 |
| A-340-D |
Feed Roll Shaft For Adjustable Feed Roll, Twin Head |
99.25 |
| A-340-E |
R.H Shaft on Right Side Of Head Plate A-2796-A, 3 1/32" Long |
77.10 |
| A-341 |
L.H Feed Wheel Shaft, Hardened and Ground With A-351 Pins |
32.60 |
| A-341-B |
L.H Feed Wheel Shaft for Twin Head (American A-1008) |
93.40 |
| A-341-C |
L.H. Feed Wheel Shaft, Twin Head Arc |
93.40 |
| A-341-D |
L.H Feed Wheel Shaft, Twin Head |
93.40 |
| A-342 |
Feed Wheel Gear |
33.75 |
| A-343 |
Head Idler Gear |
37.30 |
| A-344 |
Head Idler Gear Stud Screw |
34.10 |
| A-346 |
Former Cam With Pin |
190.95 |
| A-346-A |
Former Cam R.H Head ( Sold Only with Stud) |
190.90 |
| AA-346-1 |
Former Cam and Stud for Double Head Machine |
266.65 |
| AA-346-12 |
Former Cam & Shaft A-346 & A-850, 12" Machine |
P.O.R |
| AA-346-25AM |
Former Cam & Shaft, A-346 &A-850, 25" Machine |
P.O.R |
| AA-346-30AM |
Former Cam & Shaft, A-346 & A-850, 30" Machine |
P.O.R |
| AA-346-36AM |
Former Cam & Shaft, A-346 & A-850, 36" Machine |
P.O.R |
| A-347 |
Former Cam Retaining Washer |
2.60 |
| A-348 |
Former Cam Pin 7/16" |
11.95 |
| AA-349-B-2A |
Wire Feed Tube, Arcuate Wire |
66.95 |
| AA-349-B2 |
Wire Feed Tube, New Style, Ribbin Wire With AA-1111 |
66.00 |
| AA-349-B11 |
Wire Feed Tube Complete, 20x25 Wire |
69.35 |
| AA-349-B14 |
Wire Feed Tube Complete, New Style, .060 Wide Hybar Wire |
69.35 |
| AA-349-B-18 |
Wire Feed Tube Complete, New Style, No.18 Round Wire |
71.10 |
| A-351 |
Feed Wheel Drive Pin |
1.70 |
| A-352 |
Slide Box Dowel Pin in Head Plate |
1.80 |
| A-352-A |
Slide Box Dowel Pin, Wide Crown |
2.50 |
| A-353-D |
Finger Guard, Standard L.H Head |
27.85 |
| A-353-E |
Finger Guard, R.H Head |
32.75 |
| A-354 |
Head Gear Guard With Screws |
27.05 |
| A-358-B |
Cam Guard Cover Latch |
5.95 |
| A-359 |
Anvil Spring |
1.85 |
| A-360 |
Supporter Plunger Spring |
2.15 |
| A-362 |
1/4" Drive Oiler |
4.40 |
| A-362-A |
L Oiler |
9.80 |
| A-365 |
Brake Adjusting Screw Lock Nut |
1.65 |
| A-365-1 |
Lock Nut For Brake Band |
2.10 |
| A-366 |
Former Key Alloy Steel |
2.70 |
| Anvils For Right Hand Head |
| A-370-B2 |
1/4" Crown, .017 and .020 x .103 Wire |
75.75 |
| A-370-B11 |
1/4" Crown, 20x25 Wire |
75.75 |
| A-370-B14 |
1/4" Crown, .060 Wide HybarWire |
75.75 |
| A-370-B20 |
1/4" Crown, 20 Round Wire |
75.75 |
| A-370-B32 |
1/4" Crown, 19x 21-1/2 Wire |
75.75 |
| A-370-C2 |
5/16" Crown, .017 and .020x.103 Wire |
75.75 |
| A-370-C14 |
5/16" Crown, .060 Wide Hybar Wire |
75.75 |
| A-370-C20 |
5/16" Crown , 20 Round Wire |
82.15 |
| A-370-D2 |
3/8" Crown, .017 and .020x.103 Wire |
53.10 |
| A-370-D11 |
3/8" Crown, 20x25 Wire |
53.10 |
| A-370-D14 |
3/8" Crown, .060 Wide Hybar Wire |
53.10 |
| A-370-DX14 |
3/8" Crown, .060 Wide Hybar Wire For Use With Gripper Pin |
76.00 |
| A-370-D18 |
3/8" Crown, 18 Round Wire |
60.85 |
| A-370-E2 |
7/16" Crown, .103 Width Wire |
60.85 |
| A-370-E2A |
7/16" Crown, Arcuate, .017x.103 and .020x.103 Wire |
53.10 |
| A-370-E11 |
7/16" Crown, 20x25 Wire |
60.85 |
| A-370-E14 |
7/16" Crown, .060 Wide Hybar Wire |
60.85 |
| A-370-E18 |
7/16" Crown, 18 Round Wire |
89.50 |
| A-370-F2 |
1/2" Crown, .103 Width Wire |
63.20 |
| A-370-F11 |
1/2" Crown, 20x25 Wire |
63.20 |
| A-370-F14 |
1/2" Crown, .060 Wide Hybar Wire |
60.15 |
| UA-370-U2 |
1 1/4" Crown, .020x.103 Arc |
86.40 |
| A-371 |
Head Idler Gear Screw For R.H. Head |
25.55 |
| A-375-G |
12" Clincher Arm, New Style, above Serial # A-5900 |
221.15 |
| AA-375-G |
Clincher Arm Assembled Complete (Includes A-377-B, A-378-B, A-426, A-376, A-1203,AA-67, A-1308, & 3 A-566) |
319.60 |
| A-375-H |
Clincher Arm 12" For Inverted Head |
241.45 |
| Clincher Arms For American Machines For 20" Arm See A-476. For Arms Larger Than 20" See Below American Arms.For 12" U Arm See A-628-A. For 12" 90 Degree Angle Arm See A-629-A |
| A-375-25AM |
25" Straight Arm |
P.O.R |
| A-375-30AM |
30" Straight Arm |
P.O.R |
| A-375-36AM |
36" Straight Arm |
P.O.R |
| A-375-42AM |
42" Straight Arm |
P.O.R |
| AA-375-1-25AM |
25" Straight Arm Assembly Complete With Bracket |
P.O.R |
| AA-375-1-30AM |
30" Straight Arm Assembly Complete With Bracket |
P.O.R |
| AA-375-1-36AM |
36" Straight Arm Assembly Complete With Bracket |
P.O.R |
| AA-375-1-42AM |
42" Straight Arm Assembly Complete With Bracket |
P.O.R |
| Clincher Arms For 45 Degree Machine |
| A-375-45-32 |
32" Throat |
374.80 |
| A-375-45-37 |
37" Throat |
464.65 |
| A-375-45-44 |
44" Throat |
558.55 |
| A-375-45-50 |
50" Throat |
642.65 |
| A-375-45-58 |
58" Throat |
743.30 |
| A-375-K |
Dual Head Arm |
P.O.R |
| A-375-U |
Special "U" Arm |
P.O.R |
| See A-2375-G For Twin Head Arm |
| A-376 |
Clincher Block Clamp |
14.10 |
| A-377 |
Clincher Arm Fulcrum Bolt Below Serial No. A-5900 |
23.85 |
| A-377-B |
Clincher Arm Fulcrum Bolt Above Serial No. 5900 |
23.85 |
| A-378-B |
Fulcrum Bolt Nut |
5.25 |
| A-379 |
Head gear Guard for R.H Head |
25.95 |
| R.H Former Leg For Hand Head Or Right Side Of Dual And Twin Frame Machines |
| A-391-D2 |
3/8" Crown, .020x.103 Wire |
65.90 |
| A-391-D11 |
3/8" Crown, 20x25 Wire |
65.90 |
| A-391-D14 |
3/8" Crown, .060 Wide Hybar Wire |
65.90 |
| A-391-E-0 |
7/16" Crown, .028x.103 Wire |
39.85 |
| A-391-E1 |
7/16" Crown, .023x.103 Wire |
39.85 |
| A-391-E2 |
7/16" Crown, .020x.103 |
39.85 |
| A-391-E2A |
7/16" Crown, .020x.103 Arcuate Wire |
41.85 |
| A-391-E11 |
7/16" Crown, 20x25 Wire |
41.85 |
| A-391-E14 |
7/16" Crown, .060 Wide Hybar Wire |
41.85 |
| A-391-E32 |
7/16" Crown, 19x 21-1/2 Wire |
41.85 |
| A-391-F2 |
1/2" Crown, .020x.103 Wire |
44.95 |
| A-391-F11 |
1/2" Crown, 20x25 Wire |
44.95 |
| A-391-F14 |
1/2" Crown, .060 Wide Hybar Wire |
44.95 |
| A-391-F18 |
1/2" Crown, 18 Round Wire |
63.55 |
| L.H Former Leg For Right Hand Head Or Right Side Of Dual and Twin Frame Machines |
| A-392-D2 |
3/8" Crown, .020x.103 Wire |
68.30 |
| A-392-D11 |
3/8" Crown, 20x25 Wire |
68.30 |
| A-392-D14 |
3/8" Crown, .060 Wide Hybar Wire |
68.30 |
| A-392-E-0 |
7/16" Crown, .028x.103 Wire |
42.15 |
| A-392-E1 |
7/16" Crown, .023x.103 Wire |
42.15 |
| A-392-E2 |
7/16" Crown, .020x.103 Wire |
42.15 |
| A-392-E2A |
7/16" Crown, .020x.103 Arcuate Wire |
47.00 |
| A-392-E11 |
7/16" Crown, 20x25 Wire |
47.00 |
| A-392-E14 |
7/16" Crown, .060 Wide Hybar Wire |
47.00 |
| A-392-E32 |
7/16" Crown, 19x 21-1/2 Wire |
47.00 |
| A-392-F2 |
1/2" Crown, .020x.103 Wire |
47.85 |
| A-392-F11 |
1/2" Crown, 20x25 Wire |
47.85 |
| A-392-F14 |
1/2" Crown, .060 Wide Hybar Wire |
47.85 |
| A-392-F18 |
1/2" Crown, 18 Round Wire |
64.80 |
| Former Housings For R.H Head Or Right Side Of Twin Frame Machines |
| A-393 |
3/8,7/16, or 1/2" Crown, With Roler And Pin |
151.80 |
| A-393-A |
Under 3/8" Crown With Roller Pin |
182.50 |
| A-393-U-0 |
Former One Piece Construction With Flat Wire Grooves, .028x.103 Wire 1 1/4" Crown |
247.45 |
| A-393-U-2A |
Former, One Piece Construction Arched Wire Grooves, .020x.103 Wire 1 1/4" Crown |
247.45 |
| A-393-U-35 |
Former, One Piece Construction .037x.074 Wire 1 1/4" Crown |
259.20 |
| Former And Drivers Complete For R.H Head Or Right Side Of Twin Frame |
| AA-393-D2 |
3/8" Crown, .020x.103 Wire |
504.35 |
| AA-393-D11 |
3/8" Crown, 20x25 Wire |
504.35 |
| AA-393-D14 |
3/8" Crown, .060 Wide Hybar Wire |
504.35 |
| AA-393-E0 |
7/16" Crown, .028x.103 Wire |
434.25 |
| AA-393-E1 |
7/16" Crown , .023x.103 Wire |
422.70 |
| AA-393-E2 |
7/16" Crown, .020x.103 Wire |
417.85 |
| AA-393-E2A |
7/16" Crown, .020x.103 Arcuate Wire |
444.20 |
| AA-393-E11 |
7/16" Crown, 20x25 Wire |
447.30 |
| AA-393-E14 |
7/16" Crown, .060 Wide Hybar Wire |
447.30 |
| AA-393-E32 |
7/16" Crown, 19x 21-1/2 Wire |
496.50 |
| AA-393-F2 |
1/2" Crown, .020x.103 Wire |
450.00 |
| AA-393-F11 |
1/2" Crown, 20x25 Wire |
447.10 |
| AA-393-F14 |
1/2" Crown, .060 Wide Hybar Wire |
447.10 |
| AA-393-F18 |
1/2" Crown, 18 Round Wire |
504.05 |
| AA-393-U-0 |
1 1/4" Crown, .028x.103 Flat Wire With Supporter |
418.10 |
| AA-393-U-1 |
1 1/4" Crown, .023x.103 Flat Wire With Supporter |
429.90 |
| AA-393-U-35 |
1 1/4" Crown, .037x.074 Flat Wire With Supporter |
429.90 |
| A-397 |
Feed Drive Gear Pin (No.4 Taper Pin) |
2.80 |
| A-400 |
Clutch Pin |
44.70 |
| A-401 |
Clutch Pin Spring |
1.65 |
| A-402 |
Clutch Plate |
46.05 |
| A-406 |
Drive Pulley Pins ( 3 required) For A-470-C Hub |
16.10 |
| A-406-B |
Drive Pulley Pins (2 required) for New Style A-470-F and A-470-E Drive Pulley Hub |
17.05 |
| A-410 |
Back Guage For 12" Straight Arm |
P.O.R |
| A-412 |
Hand Adjusting Knob ( See AA-67) |
18.00 |
| A-413 |
Adjusting Knob Screw (See AA-67) |
18.00 |
| A-413-A |
Adjusting Screw, 12 and 20" Thin Arm ( See AA-67) |
18.00 |
| A-417-F |
Standard L.H Cam Guard (Cover Feed Wheels)(New Style) |
93.40 |
| AA-417-F |
Standard L.H Cam Guard (Cover Feed Wheels)(New Style) With A-358-B, A-921,A-272 and Screws |
111.05 |
| A-417-G |
R.H Head Cam Guard (Covers Feed Wheels) |
101.10 |
| A-419-A |
Wire Spool Bracket For 10 Pound Coil Holder |
24.75 |
| AA-419-A |
Wire Spool Bracket with A-129 & A-647-A |
53.60 |
| AAA-419-A |
Wire Spool Bracket Complete With A-129,A-677-A,AA-130, A-132,& A-165 With Screws |
169.75 |
| AA-420-D |
Brake Shoe With Lining A-148 |
44.10 |
| AAA-420-D |
Brake Shoe With A-148 & A-427-A Brake Screw |
56.55 |
| Clincher Blocks For 12" Straight Arm Or On 12" Combination Machine |
| A-421-A |
3/16" Crown |
55.80 |
| A-421-B |
1/4" Crown |
55.80 |
| A-421-C |
5/16" Crown |
55.80 |
| A-421-D |
3/8" Crown |
47.80 |
| A-421-E |
7/16" Crown |
32.75 |
| A-421-F |
1/2" Crown |
34.00 |
| A-421-E0 |
7/16" Crown ( Beer and Poultry Box) |
38.80 |
| A-421-SPEC |
Special Crown Sizes |
P.O.R |
| A-422 |
Cutter Blade and Driver End Screws, Fillister Head |
0.95 |
| A-422-A |
Cutter Blade Screws, Double Staple, Flat Head |
1.45 |
| A-423-B |
Clincher Arm Bracket, 12" and 20" Machines |
75.50 |
| A-423-C |
Clincher Arm Bracket 12" Inverted Head |
163.10 |
| A-423-A-AM |
Straight Arm Bracket for 20,25,30 & 36" |
116.25 |
| A-424 |
Clutch Release Latch Pin |
6.80 |
| A-425 |
Clutch Plate Collar |
6.80 |
| A-426 |
Anvil Stop Pin |
1.50 |
| A-427 |
Brake Adjusting Screw Only |
11.80 |
| A-427-A |
Brake Adjusting Screw and Oiler (A-362) |
14.25 |
| A-428-A |
Motor Bracket |
115.15 |
| A-432 |
Face Plate For R.H Head |
71.20 |
| AA-432 |
Face Plate Complete For R.H Head |
99.25 |
| Clincher Blocks For Post Machines (12" Throat) |
| A-437-D |
3/8" Crown, Ideal Bottom Stitcher |
32.85 |
| A-437-E |
7/16" Crown, Ideal Bottom Stitcher |
29.80 |
| A-437-ES |
7/16" Crown, American Bottom Stitcher |
29.80 |
| A-437-F |
1/2" Crown, Ideal Bottom Stitcher |
30.90 |
| A-437-U |
1 1/4" Crown, (Arc or Flat Wire) |
33.05 |
| A-437-E0 |
7/16" Crown, Poultry or Beer Box |
42.70 |
| A-438-G |
Clincher Block Holder |
92.00 |
| A-439-D |
Clincher Block Adjusting Nut |
88.95 |
| A-442-A |
Clincher Post Adjusting Screw Pin |
3.05 |
| A-444-B |
Base Split Stand 12" |
P.O.R |
| A-444-C |
6 3/4" Spacer For 12" Split Stand |
P.O.R |
| A-444-D |
9 3/4" Spacer for 12" Split Stand |
P.O.R |
| A-444-E |
12 3/4" Spacer for Split Stand |
P.O.R |
| A-444-F |
Inverted Head or Bench Machine |
P.O.R |
| A-444-G |
45 Degree Spacer For 12" Tilted Frame |
P.O.R |
| A-444-H |
Upper Section, Split Stand 12" |
P.O.R |
| A-446 |
Clutch Hub Screw |
2.05 |
| A-448-D |
Clutch Trip Rod |
41.30 |
| A-448-E |
Clutch Trip Rod Extension Added to A-448-D for 20" Machines |
54.60 |
| As Follows-Motors For All Types Of Ideal Wire Stitchers (Specify Type) |
| A-449-1 |
1/3 HP, 115V, 1725RPM, 60C,1PH |
233.35 |
| A-449-2 |
1/2 HP, 115V, 1140RPM, 60C, 1PH |
233.35 |
| A-449-3 |
1/3 HP, 115V, 1140RPM, 60C, 1PH |
417.45 |
| A-449-4 |
1/3HP, 115V, 1140RPM, 60C, 1PH. (Twin Frame, Corner) |
417.45 |
| A-449-5 |
1/4 HP, 115V, 1140RPM, 60C, 1PH |
353.60 |
| A-449-6 |
1/3 HP, 220V, 1425RPM, 50C, 1PH |
353.60 |
| A-449-7 |
1/3 HP, 230V, 1725RPM, 60C, 1PH |
336.75 |
| Other Motors Available On Request. Call For Pricing |
| A-450 |
Main Frame, 12" Throat Machine |
P.O.R |
| A-467-20 |
Main Frame for 20" Arm or Bottom Stitcher |
P.O.R |
| A-467-A |
Base 20" Throat, 19 3/4" High |
P.O.R |
| A-467-B |
Base 20" Throat |
P.O.R |
| A-467-C |
6 3/4" Spacer for 20" Machine |
P.O.R |
| A-467-D |
9 3/4" Spacer for 20" Machine |
P.O.R |
| A-467-E |
12 3/4" Spacer for 20" Machine |
P.O.R |
| A-467-L |
Upper Section 20" Split Stand |
P.O.R |
| A-467-M |
Twin Frame Upper R.H Section |
P.O.R |
| A-467-Y |
Twin Frame Upper L.H Section |
P.O.R |
| A-467-Z |
Twin Frame, Base |
P.O.R |
| A-470-B |
Main Drive Pulley |
141.10 |
| AA-470-B |
Main Drive Pulley Assembled with AA-470-F |
325.35 |
| AA-470-FS |
New Style Drive Pulley Hub With Bronze Bushing and (2) A-406-B Drive Pins |
184.25 |
| AA-470-GS |
New Style Drive Pulley Hub with Brinze Bushing and (2) A-406-B Drive Pins For R.H Rotation |
193.65 |
| A-476-E |
Clincher Arm, 20" Throat |
245.55 |
| A-476-U |
Clincher Arm, U Arm Stitcher |
325.20 |
| AAA-476-E |
Clincher Arm Complete, 20" |
371.15 |
| A-484-E |
Clincher Block 7/16" Crown, 30" to 42" Arm Machine |
42.60 |
| A-484-F |
Clincher Block, 1/2" Crown, 30" to 42" Arm Machine |
42.60 |
| A-485 |
Clincher Block Clamp, 30" S.A |
34.55 |
| A-488 |
Clincher Arm Bracket, 25" Machine |
171.15 |
| A-494 |
Clincher Block Clamp |
31.05 |
| Clincher Blocks For 20" Or Over straight Arm Machines |
| A-535-D |
3/8" Crown |
30.35 |
| A-535-E |
7/16" Crown |
30.35 |
| A-535-F |
1/2" Crown |
30.35 |
| A-535-E0 |
7/16" Crown ( Beer and Poultry Box) |
38.80 |
| Clincher Blocks For Thin Arm Stitchers |
| A-537-D |
3/8" Thin Arm |
62.30 |
| A-537-E |
7/16" Crown, Thin Arm |
62.30 |
| A-537-F |
1/2" Crown, Thin Arm |
67.25 |
| A-537-G |
5/8" Crown, Thin Arm |
67.25 |
| A-566 |
Arm Bracket Screw (3 required) |
2.15 |
| AAA-567 |
Open Head Device Complete For 45 Degree Machine With A-666-A |
1046.25 |
| A-569 |
Treadle Shaft |
P.O.R |
| A-575-A |
Clutch Trip Spring |
15.40 |
| A-585 |
Cap Screw |
2 |
| A-588-A |
Motor Cord and Plug, 3 Wire, 78" Long |
23.90 |
| A-589 |
Brake Shoe Spring |
3.80 |
| A-591-D |
Round Clincher Block, 3/8" Crown |
61.40 |
| A-591-E |
Round Clincher Block, 7/16" Crown |
61.40 |
| A-591-F |
Round Clincher Block, 1/2" Crown |
61.40 |
| A-592 |
Wire End Fitting, (Take All Connections) |
4.15 |
| A-592-A |
BX Connector 3/8" |
4.15 |
| A-597-D |
"U" Arm clincher Block, 3/8". Below Serial No. 5000 |
61.40 |
| A-597-E |
"U" Arm Clincher Block, 7/16". Below Serial No. 5000 |
61.40 |
| A-597-F |
"U" Arm Clincher Block 1/2". Below Serial No. 5000 |
61.40 |
| A-598 |
Face Plate Screws |
1.90 |
| F-622-A |
Toggle Lever Spring |
3.50 |
| A-628-A |
Special U Arm 12" Throat |
P.O.R |
| A-629-D |
Special 90 Degree Single Head Arm 12" Throat |
P.O.R |
| A-641 |
Set Collars, 3/4" ID, 1 1/4" OD, x 2" Face |
5.75 |
| F-641 |
Shaft Collar 2x.570 3/4 ID |
5.75 |
| A-644 |
Head Plate Dowel Pin |
1.90 |
| A-647-A |
Wire Spool Knob |
7.50 |
| A-649 |
Drive Shaft Pulley Washer Screw, 3/8-16 Hex Head |
1.90 |
| A-650 |
Driver Connection Screw (2 required) |
1.10 |
| A-651 |
Brake Shoe Lining Screw (2 required) |
1.05 |
| A-652 |
Feed Wheel Washer Screw (3 required) |
1.05 |
| A-653 |
Drive Shaft Washer Screw |
1.90 |
| A-654 |
Anvil Stop Plate Screws (2 required) |
1.10 |
| A-656 |
Wire Check Position Screw |
2.00 |
| A-658 |
Clincher Block Screw for Thin Arm |
1.60 |
| Coil Holders |
| AA-662 |
Coil Holder 5# Coil Only |
P.O.R |
| AA-662-B |
Coil Holder 5 & 10 # Coils |
P.O.R |
| AA-662-CSW |
Chicago Steel 25# Coil Holder |
P.O.R |
| AA-662-D |
Coil Holder Complete with Mounting Brackets 10/25# Coils |
370.30 |
| AA-662-D-1 |
Coil Holder With Mounting Bracket For Heads With Feed Wheels On R.H Side For 25# Coils |
370.30 |
| AA-662-DB |
Coil Holder For Bliss Style Bostich Machines 10/25-LB Coils |
370.30 |
| Chicago Steel Coil Holder Parts |
| A-662-CSW-1 |
Fixed Flange |
P.O.R |
| A-662-CSW-2 |
Removable Flange |
P.O.R |
| A-662-CSW-3 |
Support |
P.O.R |
| A-662-CSW-4 |
Brake Support |
P.O.R |
| A-662-CSW-5 |
Handle |
P.O.R |
| A-662-CSW-6 |
Wire Guide Spring |
P.O.R |
| A-662-CSW-7 |
Spindle |
P.O.R |
| A-662-CSW-8 |
Shaft Handle |
P.O.R |
| A-662-CSW-9 |
Brake Support Stud |
P.O.R |
| A-662-CSW-10 |
Brake Material |
P.O.R |
| A-662-CSW-11 |
Compression Spring |
P.O.R |
| A-662-CSW-12 |
Torsion Spring |
P.O.R |
| A-662-CSW-13 |
Slotted Retainer |
P.O.R |
| A-662-CSW-14 |
Slotted Retainer Screws |
P.O.R |
| A-662-CSW-15 |
Pin, Lock |
P.O.R |
| A-662-CSW-16 |
Set Screw |
P.O.R |
| A-662-CSW-17 |
Bushings |
P.O.R |
| A-662-CSW-18 |
Locknut |
P.O.R |
| A-662-CSW-19 |
Nut |
P.O.R |
| A-662-CSW-20 |
Retainer Ring |
P.O.R |
| A-662-CSW-21 |
Set Screws |
P.O.R |
| A-662-CSW-22 |
Lockscrews, Flange |
P.O.R |
| A-662-CSW-23 |
Brake Screws |
P.O.R |
| A-662-CSW-24 |
Bracket Screws |
P.O.R |
| A-662-CSW-25 |
Brake Support Cap |
P.O.R |
| A-662-CSW-26 |
Wire guide Pin |
P.O.R |
| A-662-CSW-27 |
Support Cap Screw |
P.O.R |
| A-662-CSW-28 |
Cotter Pin |
P.O.R |
| A-662-CSW-40 |
Bliss Bracket |
P.O.R |
| A-662-CSW-41 |
Boston Bracket |
P.O.R |
| A-662-CSW-42 |
Ideal Bracket |
P.O.R |
| A-662-CSW-43 |
H.G.U Duplex Bracket Bracket |
P.O.R |
| Ideal Coil Holder Parts |
| A-662-D7A |
Bearing Olite |
18.00 |
| A-662-D9 |
Rear Plate, Spoolholder |
76.40 |
| A-662-D11 |
Lock Washer, Main Shaft |
5.80 |
| A-662-D12 |
Spring, Wire Tension Control |
40.95 |
| A-662-D13LH |
Braking Block, Tension Spring L.H |
46.85 |
| A-662-D13RH |
Braking Block, Tension Spring R.H |
46.85 |
| A-662-D14 |
Shaft, Braking Block |
18.00 |
| A-662-D15 |
Lock Ring, Main and Block Shaft |
1.70 |
| A-662-D16 |
Stud, Brake Swivel Connecting |
9.05 |
| A-662-D17 |
Lock Nut, Brake Tension Adjusting Screw |
1.70 |
| A-662-D18 |
Lock Ring, Brake Belt Anchor Stud |
1.70 |
| A-662-D19 |
Plunger, Brake Tension Spring |
18.05 |
| A-662-D20 |
Spring, Brake Tension |
5.45 |
| A-662-D21 |
Screw, Brake Tension Adjusting |
18.00 |
| A-662-D22RH |
Main Casting, Spool Bracket R.H |
77.90 |
| A-662-D22LH |
Main Casting, Spool Bracket L.H |
77.90 |
| A-662-D23 |
Stud, Brake Belt Anchor |
9.05 |
| A-662-D24LH |
Mount, Spool Bracket L.H |
47.30 |
| A-662-D24RH |
Aluminum Spoil Mount, R.H |
47.30 |
| A-662-D25 |
Belt Assembly, Brake with Swivel |
47.30 |
| A-662-D26 |
Stud 7 Lock Nut, Brake Tension Swivel |
20.60 |
| A-662-D27 |
Lock Ring, Brake Swivel Stud |
1.90 |
| A-662-D30 |
Screw, Flat Head, 2 1/2" Core |
1.80 |
| A-662-D31 |
Screw, Flat Head 3 3/4" Core |
1.80 |
| A-662-D33 |
Screw, Flat Head for No.12 |
1.80 |
| A-662-D34 |
Cap Screw, 1" Hex Head, 1" Length |
2.95 |
| A-662-D35 |
Lock Washer |
1.80 |
| A-662-D36 |
Face Plate, Spoolholder |
92.40 |
| A-662-D37 |
Roll Pin, Face Plate Release Assembly |
2.95 |
| A-662-D38 |
Lock Ring, Face Plate Assembly |
2.00 |
| A-662-D39 |
Shaft, Face Plate Release Assembly |
25.35 |
| A-662-D40 |
Spring, Face Plate Release Assembly |
25.35 |
| A-662-D41 |
Knob, Face Plate Release Assembly |
37.15 |
| A-662-D42 |
Set Screw, Knob |
1.70 |
| A-662-D44 |
Cam , Spool Lock |
41.10 |
| A-662-D45 |
Set Screw, Brake Swivel Connecting Stud |
1.70 |
| A-662-D46 |
Set Screw, Main Shaft |
1.70 |
| A-662-D47 |
Set Screw, Brake Belt Anchor Stud |
1.70 |
| A-662-D48 |
Shaft, Main Spool |
12.80 |
| A-662-D49 |
Set Screw, Brake Block Shaft |
1.70 |
| A-662-D50 |
Roll Pin, Block Stop |
1.70 |
| A-662-D51 |
Mount, Spool Bracket (Acme Machine) |
58.80 |
| A-662-D52 |
Mounting Spool Bracket, Bliss Machine |
58.80 |
| A-666-A |
Mounting Bracket for Swivel type Open Head Device |
105.75 |
| A-666-D |
Mounting Bracket for Solid Type Open Head Device |
P.O.R |
| A-667 |
Clincher Tongue |
84.00 |
| A-667-D |
Clincher Tongue |
330.65 |
| A-668 |
Head Plate Bushing |
25.10 |
| A-668-B |
Head Plate Bushing (Twin Head) |
58.60 |
| A-669 |
Head Gear Drive |
42.55 |
| A-673 |
5/16" .18 Hex Nut |
2.05 |
| A-676 |
Pivot Stud |
62.80 |
| A-678 |
Swivel Bracket |
88.35 |
| A-679 |
Spacer |
52.15 |
| A-692-D |
Clincher Post Base, Above Serial No. A-10000 |
160.65 |
| AAA-692-D |
Clincher Post Base Assembled, Complete Above Serial No.A-10000. (Includes AA-703-W, A-692-D, A-694-D, A-695-C, A-1169, A-1168, A-1168, A-774-A, A-138-A, A-1344, A-1320 & A-1307) |
896.50 |
| AA-692-D |
Clincher Post Base Assembled Complete. Above Serial No. A-10000 with A-694-C |
674.90 |
| A-694-D |
Clincher Post Bracket Above Serial No. A-10000 |
126.90 |
| A-695-C |
Clincher Post Cam |
94.85 |
| A-696 |
Clincher Post Cam Roll |
35.75 |
| A-697 |
Cam Roll Eccentric Bushing |
29.75 |
| A-698-C |
Treadle for Bottom Stitcher, Ideal |
61.20 |
| A-698-D |
Treadle Long 12" |
66.55 |
| A-699 |
Treadle Shaft for A-698 |
39.35 |
| A-699-C |
Treadle Shaft |
39.35 |
| A-700-A |
Clutch Shifter Rod Arm |
25.20 |
| A-701 |
Clutch Operating Rod, 12" Bottom |
31.25 |
| A-702 |
Clutch Operating Rod, 20" Bottom |
39.35 |
| A-702-A |
Clutch Operating Rod, 25" Bottom |
46.05 |
| A-703-W |
Clincher Post, 12" Bottom |
124.50 |
| A-703-WA |
Square Clincher Post, 17 3/4" Long |
293.30 |
| AA-703-W |
Clincher Post Complete without Clincher Block |
335.10 |
| A-703-X |
Clincher Post 20" Bottom |
132.30 |
| AA-703-X |
Clincher Post 20" Bottom Complete with Block |
345.00 |
| AA-703-Y |
Clincher Post Tube for Square A-703-WA Post, 12" Bottom with A-439-D |
521.00 |
| AA-703-Z |
Clincher Post Tube with A-703-WA Square Post, 20" Bottom and A-439-D |
517.60 |
| A-766 |
R.H Slide Box |
147.50 |
| AA-766 |
R.H Slide Box Complete without Former and Driver or Face Plate, but with Anvil and Cutter Tube Assembly |
237.30 |
| A-767 |
Wire Guide Friction Roller, O.S |
2.05 |
| A-768 |
Wire Guide Friction Roller Spring, O.S |
2.05 |
| A-769 |
Wire Guide Friction Roller Lock Wasjer, O.S |
1.40 |
| A-770-12 |
12" Thin Arm |
P.O.R |
| A-770-20 |
20" Thin Arm |
P.O.R |
| A-770-25 |
25" Thin Arm |
P.O.R |
| A-771-C |
Thin Arm Support |
149.25 |
| A-773 |
Clutch Shifter Rod Arm Stop, Bottom Stitcher |
30.50 |
| A-774 |
Spring, Same As A-774-A |
11.05 |
| A-774-A |
Clincher Post Spring |
11.05 |
| A-788 |
Flat Face Plate, C.I for R.H or L.H Head (Specify Side) |
65.25 |
| A-798 |
Slide Box, L.H Standard |
143.50 |
| AA-798 |
Standard L.H Slide Box Complete |
214.85 |
| AAA-798-1-B |
Standard L.H Slide Box Glove .022x.078 |
845.50 |
| AAA-798 |
Standard L.H Slide Box Complete with Face Plate, Former and Driver |
729.20 |
| A-798-M |
Slide Box 1" and 31/32" Staple |
274.05 |
| A-798-P |
Slide Box 1" Insert Staple |
274.05 |
| A-800 |
Face Plate for Standard L.H Head |
69.25 |
| A-800-A |
Face Plate with 3/16" Driver Support for 1/4" Crown |
71.70 |
| AA-800 |
Face Plate Complete Standard L.H (Same as AA-4) |
107.55 |
| A-800-M |
Face Plate 31/32 and 1" Crown |
119.85 |
| A-800-P |
Face Plate 1" Crown |
119.85 |
| A-838 |
Post Holder |
49.60 |
| A-848 |
Former Leg Screws |
0.95 |
| A-850* |
Drive Shaft, Approx. 23" Long for 12" Machine |
94.50 |
| A-850-C* |
Drive Shaft for Invert Head |
103.65 |
| A-850-12-AM* |
Drive Shaft , 12" Machine |
94.50 |
| A-850-20-AM* |
Drive Shaft, 20" Machine |
119.50 |
| A-850-25-AM* |
Drive Shaft, 25" Machine |
137.05 |
| A-850-30-AM* |
Drive Shaft, 30" Machine |
144.85 |
| A-850-36-AM* |
Drive Shaft, 36" Machine |
166.90 |
| A-850-42-AM* |
Drive Shaft 42" Machine |
175.25 |
| *Add $ 15.70 for A-1099-B Shaft, End Collar |
| A-851 |
Clutch Hub, Standard with A-446 |
98.15 |
| A-851-A |
Clutch Hub with A-446, Inverted Head |
107.90 |
| A-865 |
Main Drive Shaft Bushing in 45 Degree Angle Housing |
94.40 |
| A-866 |
45 Degree Angle Housing |
254.45 |
| A-867 |
Cover Plate for 45 Degree Housing |
17.90 |
| A-868-A |
Stub Shaft, 45 Degree Machine |
93.40 |
| A-869 |
Auxiliary Drive Shaft Bearing in 45 Degree Angle Housing |
93.40 |
| A-870-A |
Bevel Gears for 45 Degree Machine ( 2 required) |
154.95 |
| A-872-A |
Clincher Arm Fulcram Stud, Arm Bolt |
50.05 |
| A-873 |
Clincher Arm Fulcrum Stud Washer, 45 Degree Machine |
18.00 |
| A-875-D |
Clincher Block, 45 Degree Machine for 3/8" Crown |
49.00 |
| A-875-E |
Clincher Block, 45 Degree Machine for 7/16" Crown |
49.00 |
| A-875-F |
Clincher Block, 45 Degree Machine for 1/2" Crown |
49.00 |
| A-876 |
Clincher Arm Bolt Washer, 5/8" Hole |
7.20 |
| A-878-32 |
Table - 32" Throat 45 Degree Stitcher |
P.O.R |
| A-878-37 |
Table-37" Throat 45 Degree Stitcher |
P.O.R |
| A-878-44 |
Table-44" Throat 45 Degree Stitcher |
P.O.R |
| A-878-50 |
Table-50" Throat 45 Degree Stitcher |
P.O.R |
| A-878-58 |
Table-58" Throat 45 Degree Stitcher |
P.O.R |
| A-881-32 |
L.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-A-32 |
R.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-37 |
L.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-A-37 |
R.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-44 |
L.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-A-44 |
R.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-50 |
L.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-A-50 |
R.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-58 |
L.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-881-A-58 |
R.H Table Support, 45 Degree Stitcher |
P.O.R |
| A-882 |
Clincher Tongue Adjusting Stud |
P.O.R |
| A-905 |
90 Degree Housing for L.H Head Turned Right |
P.O.R |
| A-905-A |
90 Degree Housing for R.H Head Turned to Right or for L.H Head Turned to Left Side of Drive Shaft |
559.95 |
| A-906 |
90 Degree Housing Cover |
20.80 |
| A-907 |
Stud Shaft for 90 Degree Housing |
70.40 |
| A-911 |
Drive Pulley Guard Cover |
116.75 |
| A-913 |
Vee Belt |
18.45 |
| A-913-A |
Vee Belt for Gasoline Motor, see A-5085 |
19.40 |
| A-913-B |
Vee Belt for Bench Stitcher |
19.40 |
| A-919-2 |
Motor Base Stud, Constant Speed |
8.20 |
| A-921-A |
Cam Guard Stud |
9.80 |
| AA-924-GE |
Starting Switch, 110V, 60 Cycle, 1Phase Push Button |
80.85 |
| AA-924-A-GE |
Starting Switch, 220V, 60 Cycle, 3 Phase Push Button |
89.45 |
| AA-924-LVP |
Replaced By AA-924-GELVP |
***** |
| A-924-1-GELVP |
Relay, LVP Switch |
84.05 |
| A-924-1A |
Relay Switch Dayton |
84.30 |
| A-924-2-GELVP |
Enclosure LVP Switch |
29.65 |
| A-924-2A |
Enclosure LVP Switch Dayton |
29.65 |
| A-924-3-GELVP |
Push Button Station with Enclosure LVP Switch |
73.30 |
| A-924-3A |
Push Button Station with Enclosure LVP Switch Dayton |
73.30 |
| A-924-4-GELVP |
Neon Indicating Light, LVP Switch |
13.90 |
| A-924-5-GELVP |
Nipple, LVP Switch |
3.00 |
| AA-924-GELVP |
Switch Assembled Complete without Mounting Bracket (see A-1911 for Bracket) |
203.45 |
| A-952-A |
Brake Operating Lever |
29.15 |
| A-953-A |
Brake End Only for Releasing Brake |
16.35 |
| A-954 |
Brake Lining for Releasing Brake |
16.35 |
| A-955 |
Brake Adjusting Screw for Releasing Brake |
8.25 |
| A-959 |
Brake Band Pin for Releasing Brake |
3.75 |
| A-960 |
Brake Band End for Releasing Brake |
9.90 |
| A-961 |
Clutch Toggle Link ( 2 required) Hardened |
5.70 |
| A-962-B |
Clutch Toggle Lever, Solenoid Trip |
34.70 |
| A-962-E |
Clutch Toggle Lever, Solenoid Trip, Bench Model |
32.75 |
| A-963-C |
Clutch Toggle Lever Stud, (Eccentric) After A-5500 |
22.55 |
| A-964 |
Clutch Toggle Lever Stop, Under A-5500 |
18.75 |
| A-965 |
Clutch Toggle Lever Linik, Hardened |
6.85 |
| A-966 |
Stud for Solenoid Trip (3 required) |
4.05 |
| A-973 |
Solenoid Housing |
96.90 |
| A-974 |
Solenoid Housing Cover |
17.85 |
| A-975 |
Ideal Solenoid, with A-1205, 110V 60 Cycle, 1 Phase |
413.30 |
| AA-975 |
Ideal Solenoid, Complete with A-965, A-977, A-1205, 110V, 60 Cycle, 1 Phase |
433.05 |
| A-975-AM |
Ideal Solenoid with A-976, 110V, 60 Cycle, 1 Phase |
129.30 |
| AA-975-AM |
Ideal Solenoid Complete with A-976, A-977, A-965 110V, 60 Cycle, 1 Phase |
146.00 |
| A-975-B |
Ideal Bench Machine Solenoid with A-1205, 110V, 60 Cycle, 1 Phase |
417.00 |
| AA-975-B |
Ideal Bench Machine Solenoid Complete with A-1205, A-961, A-977, 110 V, 60 Cycle, 1 Phase |
436.00 |
| A-975-D |
Ideal Solenoid 220V, 60 Cycle, 1 Phase with A-1205 |
P.O.R |
| AA-975-D |
Ideal Solenoid Complete 220V, 60 Cycle, 1Phase with A-1205,A-965,A-977, A-966 |
P.O.R |
| A-975-D-AM |
American Solenoid 220V, 60 Cycle, 1 Pahse with A-976 |
148.50 |
| AA-975-D-AM |
American Solenoid Complete, 220V, 60 Cycle, 1Phase with A-976, A-977, A-965 |
163.70 |
| A-975E |
Ideal Solenoid 220V, 50 Cycle with A-976 |
P.O.R |
| A-975-S |
Ideal Solenoid 110V, 50 Cycle |
P.O.R |
| AA-975-E |
Ideal Solenoid Complete 220V, 50 Cycle with A-976, A-977, A-965 |
P.O.R |
| A-976-AM |
Solenoid Link Pin |
4.10 |
| A-977 |
Rubber Spacers for Solenoid Clutch Toggle |
4.10 |
| A-1027-A |
Peg Arm for Wire Lead Machine |
P.O.R |
| A-1028 |
Adapter Plate to Mount 20 Box Head on Ideal Stand |
86 |
| AA-1036 |
Open Head Device, Solid Type, Seam Stitcher |
1777.40 |
| AA-1037-D |
Clincher Block, 3/8" Crown, Solid Open Head Device 45 Degree Head |
54.75 |
| A-1037-E |
Clincher Block, 7/16" Crown, Solid Open Head Device 45 Degree Head |
54.75 |
| A-1037-F |
Clincher Block 1/2" Crown, Solid Open Head Device 45 Degree Head |
57.25 |
| A-1038 |
Open Head Device Support Plate, Solid Type |
349.60 |
| A-1039 |
Open Head Device Angle Bracket |
119.85 |
| A-1040 |
Open Head Device Adjustment Bracket |
111.15 |
| AA-1049-B |
Wire Feed Tube for R.H Head with AA-1111 |
125.90 |
| A-1049-12-AM |
Silver Arm 12" Machine |
P.O.R |
| A-1049-20-AM |
Silver Arm 20" Machine |
P.O.R |
| A-1049-25-AM |
Silver Arm 25" Machine |
P.O.R |
| AA-1049-1-AM |
Silver Arm with Support, Clincher Block and Bracket, 12" Machine |
P.O.R |
| AA-1049-1-AM |
Silver Arm with Support, Clincher Block and Bracket, 20" Machine |
P.O.R |
| AA-1049-1-AM |
Silver Arm with Support, Clincher Block and Bracket, 25" Machine |
P.O.R |
| A-1052 |
Arcuate R.H Feed Wheel Only |
131.40 |
| AA-1052 |
R.H Feed Wheel with Cam, Arcuate Wire |
169.55 |
| A-1053 |
R.H Feed Wheel Cam, Arcuate Wire |
54.90 |
| A-1054 |
Cam Locking Washer, Arcuate Feed Wheel |
3.55 |
| A-1056 |
Arcuate L.H Feed Wheel |
131.40 |
| A-1059 |
Pulley Bushing |
34.70 |
| A-1061 |
Eccentric Driver Connection Bushing |
51.35 |
| A-1063 |
Feed Roll Hinge Stop |
3.30 |
| A-1071 |
Ball, Clincher Block Adjustment Nut |
2.95 |
| A-1072 |
Spring, Clincher Blokc Adjustment Nut |
1.85 |
| A-1073 |
Treadle Pin |
5.70 |
| A-1074 |
Holding Pin and Chain for Bottom Stitcher |
8.30 |
| WSA-1075 |
Supporter Plunger Bracket, Wide Crown Stitcher |
37.60 |
| WSA-1075-A |
Supporter Plunger Bracket, Wide Crown, R.H and L.H Dual Head |
48.55 |
| WSA-1076 |
Supporter Plunger Spring, Wide Crown |
2.90 |
| WSA-1077 |
Supporter Plunger, Wide Crown |
17.50 |
| WSA-1078 |
Supporter Plunger, Bracket Plate |
43.85 |
| A-1079 |
Feed Roll Shaft, Arcuate ( 2 required) Hardened and Ground |
46.60 |
| WSA-1080 |
Anvil Post, Wide Crown |
18.00 |
| WSA-1081 |
Wire Guide Block, Wide Crown |
15.55 |
| A-1082 |
Feed Roll Hinge Spring |
3.75 |
| A-1083 |
Feed Roller Shoulder Bolt |
11.05 |
| AA-1083-AM |
Bottom Stitcher Trip Connection |
P.O.R |
| A-1084 |
Driver Bar, Twin Head |
147.75 |
| A-1085 |
Former Bar, Twin Head |
148 |
| A-1086 |
Guide Bar Shaft, Twin Head |
34.70 |
| A-1088 |
Roller Chain, Twin Head Machine |
40.90 |
| A-1088-AM |
Treadle, Mechanical Trip, Straight Arm |
P.O.R |
| A-1089 |
Driver Sprocket with No.5 Taper Pin Hole 1" Bore, Twin Head |
36.80 |
| A-1090 |
Feed Roll Drive Sprocket ( 2 required) |
29.75 |
| A-1091 |
Bronze Bushing, Twin Head |
22.30 |
| A-1092 |
Idler Sprocket, Twin Head (2 required) |
41.25 |
| A-1093 |
Slide Box Bar (Mounting Bar) Twin Head |
118.30 |
| A-1094 |
Drive Pin, Twin Head |
12.45 |
| A-1095 |
Former Bar Pin, Twin Head (Cam Roller Studs) |
26.25 |
| A-1096 |
Driver Pin or Former Pin (Square Head) Twin Head |
26.25 |
| A-1097 |
Guide Rod Bushing, Twin Head |
14.90 |
| A-1098 |
Front Cover Guard (Plexiglass) |
74.15 |
| A-1099 |
Shaft End Clamp Collar, 3/4" Diameter Hole |
16.50 |
| A-1099-A |
Shaft End Clamp Collar, 7/8" Diameter Hole |
16.50 |
| A-1099-B |
Shaft End Clamp Collar, 1" Diameter Hole |
16.50 |
| A-1099-C |
Shaft End Clamp Collar, 1 1/8" Diameter Hole |
16.50 |
| A-1099-D |
Shaft End Clamp Collar, 1 1/4" Diameter Hole |
16.50 |
| AA-1100 |
Idler Gear Take Up Bracket, Twin Head |
59.00 |
| A-1102 |
Idler Gear Bracket Clamp, Twin Head |
19.85 |
| A-1103 |
Feed Roll Shaft Bushing, Twin Head |
21.60 |
| A-1104 |
L.H Gear Guard, Twin Head |
51.50 |
| A-1104-A |
Feed Wheel Gear Guard, Twin Head |
60.10 |
| A-1105 |
R.H Gear Guard, Twin Head |
52.00 |
| A-1105-B |
R.H Guard, New Style, Twin Head |
52.00 |
| A-1106-D |
Clincher Block, 3/8" Crown, Twin Head |
34.20 |
| A-1106-E |
Clincher Block, 7/16" Crown, Twin Head |
34.20 |
| A-1106-F |
Clincher Block, 1/2" Crown, Twin Head |
34.20 |
| A-1107 |
Clincher Block Holder, Twin Head |
124.50 |
| A-1108 |
Clincher Block Holder, Twin Head |
124.50 |
| A-1108-K |
Clincher Block Holder, Twin Head |
124.50 |
| F-1109 |
Set Collar |
4.45 |
| A-1110 |
Wire Feed Tube Friction Screw ( for AA-1111) |
2.00 |
| A-1111 |
Wire Feed Tube Friction Body |
9.05 |
| AA-111 |
Wire Feed Tube Friction, Complete |
15.25 |
| A-1112 |
Wire Feed Tube Plunger |
3.20 |
| A-1113 |
Wire Feed Tube Plunger Spring (For AA-1110) |
1.45 |
| A-1114 |
Former Cam Stud, Twin Head, 9/16" Rivet End |
64.60 |
| A-1119 |
Flat Face Plate for R.H Head |
64.60 |
| A-1120 |
Ideal Bench Stitcher Base |
P.O.R |
| A-1121 |
Ideal Bench Stitcher Top Section |
P.O.R |
| A-1122 |
Ideal Bench Stitcher Extension (3 1/2") |
P.O.R |
| A-1123 |
G.E Solenoid, Bracket |
59.50 |
| A-1124 |
Clutch Toggle Block |
37.65 |
| A-1125 |
Main Drive Shaft, IBM Machine |
90.45 |
| A-1125A |
Main Drive Shaft, IBM Machine with Extension |
136.35 |
| A-1139 |
Electric Connecting Cord 30" Switch to Solenoid or Switch to Motor |
20.35 |
| A-1139-A |
Electric Connecting Cord 30" Switch on Side or Solenoid |
17.90 |
| A-1139-B |
Electric wire Used from Switch Up Front to Motor ( IB-1240) |
17.90 |
| A-1139-C |
Electric wire Used from Switch Up Front to Motor ( IB-2043) |
23.10 |
| A-1139-D |
Electric Wire Used on Switch Up Front to Solenoid Box |
17.90 |
| A-1140 |
Electric Connection Cord (Foot Switch to Solenoid Box) |
17.90 |
| A-1140-1 |
144" Extra Long Cord |
35.60 |
| AA-1141-A |
Line Master Foot Switch Watertight |
139.70 |
| AA-1141 |
Foot Switch Complete without Guard |
69.15 |
| A-1142 |
Micro Switch |
39.05 |
| A-1145 |
Guard for Foot Switch AA-1141 |
52.80 |
| A-1145A |
Guard for Twin Frame Foot Switch |
81.70 |
| A-1147 |
On & Off Cord |
26.80 |
| A-1148-A |
SJ Cord |
7.30 |
| A-1149-B |
Motor Pulleys, 1/2" Bore, 2" O.D |
25.05 |
| A-1149-C |
Motor Pulleys, 1/2" Bore, 2 1/4" O.D |
25.05 |
| A-1149-D |
Motor Pulleys, 1/2" Bore, 2 1/2" O.D |
25.05 |
| A-1149-E |
Motor Pulleys, 1/2" Bore, 2 3/4" O.D |
25.05 |
| A-1149-F |
Motor Pulleys, 1/2" Bore, 3" O.D |
31.40 |
| A-1150-B |
Motor Pulleys, 5/8" Bore, 2" O.D |
25.05 |
| A-1150-C |
Motor Pulleys, 5/8" Bore, 2 1/4" O.D |
25.05 |
| A-1150-D |
Motor Pulleys, 5/8" Bore, 2 1/2" O.D |
25.05 |
| A-1150-E |
Motor Pulleys, 5/8" Bore, 2 3/4" O.D |
25.05 |
| A-1150-F |
Motor Pulleys, 5/8" Bore, 3" O.D |
32.95 |
| WSA-1151 |
Supporter Pin |
2.10 |
| A-1152 |
Washer |
1.25 |
| A-1153 |
Feed Roll Hinge Set Screw |
1.00 |
| A-1154 |
Feed Roll Hinge Srew |
1.05 |
| A-1155 |
Feed Roll Hinge Pin |
5.75 |
| A-1156 |
Slide Box Clamp, Twin Head |
17.25 |
| A-1161 |
Feed Roller Shaft Bushings with Oil Groove, Twin Head |
17.30 |
| A-1161-A |
Bushing Ideal Twin Head Gear Case |
36.05 |
| A-1165-25 |
Acme Heavy Duty 25# Coil Brake Spring |
P.O.R |
| A-1166 |
Motor Mounts, Rubber ( 4 required) |
6.05 |
| A-1167 |
Anvil Post Pin, Wide Crown or Lipstick Machine |
2.05 |
| A-1168 |
Clincher Post Bracket Trunion |
26.65 |
| A-1169 |
Hex Nuts for Trunion (2 required) |
7.15 |
| Drive Shafts for Machines Over Serial No. A-5500 |
| A-1170* |
20" Machine, 32 1/8" Long |
110.78 |
| A-1171* |
25" Machine, 37 1/8" Long |
123.50 |
| A-1172* |
30" Machine, 42 1/8" Long |
143.60 |
| A-1173* |
20" 90 Degree Machine, 31 7/8" Long |
135.90 |
| A-1174* |
25" 90 Degree Machine, 36 7/8" Long |
166.35 |
| A-1175* |
30" 90 Degree Machine, 41 7/8" Long |
181.10 |
| A-1176* |
27" 45 Degree Machine, 33 5/16" Long |
143.60 |
| A-1177* |
32" 45 Degree Machine, 38 5/16" Long |
155.65 |
| A-1178* |
37" 45 Degree Machine, 43 5/16" Long |
179.75 |
| A-1180 |
Flap Guide |
54.65 |
| A-1181 |
Flap Guide Spring |
6.25 |
| A-1182 |
Flap Guide Pivot Shaft |
6.25 |
| A-1183 |
Flap Guide Stop Screw (2 required) |
1.40 |
| A-1185* |
Drive Shaft for 50", 45 Degree Machine 54 5/8" Long |
222.30 |
| A-1186* |
Drive Shaft for 58", 45 Degree Machine 62 5/8" Long |
248.05 |
| *Add $ 15.70 for A-1099-B Shaft, End Collar |
| A-1190-A |
Idler Gear Shaft, Dual Head |
16.35 |
| A-1194 |
Auxiliary Stub Shaft, Right Angle Head with Housing A-905 and 3" Spacer A-1193 |
P.O.R |
| A-1194-A |
Auxiliary Stub Shaft A.A.H |
P.O.R |
| A-1195 |
Miter Gear, Right Angle Head, 1" Hole |
140.05 |
| A-1196 |
Miter Gear, Right Angle Head 3/4" Hole |
140.05 |
| WSA-1197 |
Supporter Plunger Bracket Plate, R.H for Wide Crown Dual Head |
183.86 |
| A-1201 |
Starting Switch Only without Box, 110V, 60 Cycle, 1 Phase (6808) |
49.00 |
| A-1201-A |
Starting Switch Only without Box, 220V, 60 Cycle, 3 Phase (6710) |
62.35 |
| A-1201-B |
Starting Switch 1 Phase (CR101JADA) |
70.50 |
| A-1201-C |
Starting Switch 3 Phase (CR101BAOA) |
77.95 |
| A-1202 |
Pulley Guard Cover Screws |
1.40 |
| A-1203 |
Clincher Block Clamp Screw |
1.60 |
| A-1204 |
Clincher Head for Twin Bottom Stitcher |
193.70 |
| AA-1205 |
Bolt Assembly for Solenoid Plunger |
15.60 |
| A-1206 |
Rear Shaft Bushing Screws |
1.10 |
| A-1207-D |
Clincher Block for Top Seamer, 3/8" Crown |
P.O.R |
| A-1207-E |
Clincher Block for Top Seamer, 7/16" Crown |
P.O.R |
| A-1207-F |
Clincher Block for Top Seamer, 1/2" Crown |
P.O.R |
| A-1208 |
Clincher Post or Hinge Screw |
1.40 |
| WSA-1209 |
Wire Guide 1 3/8" Crown |
28.14 |
| A-1210 |
Plunger for A-975 Solenoid, 110 V |
89.10 |
| A-1210-A |
Plunger for A-975 Solenoid, 220V |
89.10 |
| A-1211 |
Solenoid Coil |
124.48 |
| A-1212 |
Solenoid Coil |
124.50 |
| A-1216 |
Dowel pin |
1.45 |
| A-1217 |
Clutch Hub Lock Screw, Shake Proof |
2.05 |
| A-1219 |
Wire Check Set Screw |
1.40 |
| A-1220 |
Stand Adapter |
361.85 |
| A-1222 |
Drive Pulley, Single Groove, Bench Stitcher |
199.80 |
| A-1226 |
Clutch Plate for Clockwise Rotation ( Opposite A-402) |
60.25 |
| A-1228 |
Feed Roll Shaft Bushing |
37.75 |
| A-1230 |
Clincher Lever Eccentric Stud Bushing |
37.75 |
| A-1234 |
Centering Gauge, Wide Crown Machine Big Bolt |
23.00 |
| A-1235 |
Centering Gauge, Wide Crown Machine Small Bolt |
23.00 |
| A-1236 |
Centering Gauge, Wide Crown Machine 12" Rod |
17.60 |
| A-1237 |
Centering Gauge, Wide Crown Machine 7" Rod |
17.60 |
| AA-1237 |
Centering Gauge, Complete, Wide Crown Machine |
75.10 |
| A-1238 |
Bronze Bushing for Head Plate, Arcuate Wire (2 required) |
19.80 |
| A-1242-A |
Pulley Guard for Bench Machine |
77.15 |
| A-1242-C |
Pulley Guard Cover IBM Machine |
106.00 |
| A-1242-D |
Pulley Guard Cover Support |
65.85 |
| A-1243 |
Clincher Arm Bracket for Model IBM |
112.30 |
| A-1244 |
Clincher Arm Bracket for Model IBM |
112.30 |
| A-1245 |
Drive Shaft for Model IBM 6" |
84.80 |
| A-1245-A |
Drive Shaft for Model IBM 10" |
98.35 |
| A-1246 |
Drive Shaft for Model IBM 20 Box Head |
101.65 |
| A-1247 |
Drive Shaft for Model IBM with 102 R.F Head |
101.65 |
| A-1248 |
Clincher Arm Bracket, 102 Stitcher |
163.00 |
| A-1249 |
Clincher Arm for Model LBM with 20 Box Head |
81.75 |
| A-1250 |
Clutch Pin for R.H Side of Twin Frame Machine |
56.35 |
| UA-1270 |
Support Bracket Plate, 1 1/4" Crown |
38.10 |
| UA-1271 |
Supporter Housing 1 1/4" Crown |
96.05 |
| UAA-1271 |
Supporter Housing Complete, with A-1326,A-1327,UA-1275,UA-1271,UA-1274, A-1153, UA-1272,UA-1273 and A-167-A |
180.60 |
| UA-1272 |
Supporter Plunger, 1 1/4" Crown |
55.15 |
| UA-1273 |
Supporter Plunger Roller, 1 1/4" Crown |
9.65 |
| UA-1274 |
Supporter Plunger Spring, 1 1/4" Crown |
2.40 |
| UA-1275 |
Supporter Plunger Stop Pin, 1 1/4" Crown, Arcuate Wire |
3.30 |
| UA-1276 |
Supporter Pin, 1 1/4" Crown |
3.30 |
| A-1280 |
5.187 Extension used on Ideal or Ameircan Stands |
P.O.R |
| A-1281 |
10.187 Extension used on Ideal or American Stands |
P.O.R |
| A-1282 |
16.187 Extension used on Ideal or American Stands |
P.O.R |
| A-1283 |
Arm Bracket, New Style for 45 and 90 Degree Machines |
342.20 |
| A-1284 |
Mainstand Extension 6" Square Box Stitcher |
179.30 |
| A-1286 |
Mainstand Extension 8" Long |
189.00 |
| A-1289 |
Mainstand Extension 12" Long |
205.45 |
| A-1291 |
Motor Support Stud, Bench Stitcher |
5.95 |
| A-1301 |
Cap Screw, 1/4" .20 x 1/2" |
1.10 |
| A-1302 |
Cap Screw 5/16" .18x 1" |
1.45 |
| A-1303 |
Cap Screw 5/16" .18 x 1 1/2" |
1.45 |
| A-1305 |
Cap Screw 3/8 x 24x1 |
2.05 |
| A-1307 |
Cap Screw 1/2 .13x 1 1/2 |
2.68 |
| A-1307-A |
Cap Screw 1/2 .13 x 1 3/4 |
2.73 |
| A-1309 |
Cap Screw 1/2. 13x 2" |
3.05 |
| A-1311 |
1/4" Washer |
1.10 |
| A-1314 |
Cap Screw 5/16" .18 x 1 3/4" |
1.75 |
| A-1316 |
Cap Screw 10/32 x 3/8 |
1.10 |
| A-1317 |
Cap Screw 1/4" .20x1/2" |
1.10 |
| A-1320 |
1/2" SAE Washer |
1.10 |
| A-1320-A |
1/2" Flat Washer |
1.10 |
| A-1321 |
Cotter Pin 1/6" x 3/4" --3/32" x 3/4" |
1.40 |
| A-1322 |
Bolt 10/32 x 1/2 |
1.40 |
| A-1323 |
1/4" Lock Washer |
1.10 |
| A-1328 |
Screw 10/32 x 3/8 |
1.10 |
| A-1329 |
Cap Screw 6/32x3/8 |
1.10 |
| A-1331 |
Socket Head Screw 1/4 x 1/2 |
1.10 |
| A-1333 |
Screw 5/16 x 18 7/8 |
1.10 |
| A-1334 |
Screw 5/16 x 18 1/2 |
1.50 |
| A-1335 |
Screw 5/16 x 18 x 2 1/2 |
1.65 |
| A-1338 |
Cap Screw 1/4 .28 x 5/8 Socket |
1.85 |
| A-1342 |
Flat Socket Screw 5/16 .18 x 1 1/4 |
1.52 |
| A-1344 |
Screw 3/8 .16 x 1/2 |
1.55 |
| AA-1344 |
Rigid Open Head Device, Ideal and American |
2281.25 |
| A-1345 |
Socket Screw 1/4 .20x3/8 |
1.10 |
| A-1352 |
RHM Screw 10/32 x 5/8 |
1.10 |
| A-1371 |
Socket Screw 1/4 .20 x 1/4 |
1.10 |
| A-1373 |
Bolt 5/16 .18 x 1/2 |
1.65 |
| A-1375 |
Screw 5/16 .18 x 3/8 |
1.10 |
| A-1377 |
Screw 3/8 .16x1 |
1.65 |
| A-1378 |
Screw 5/16 .18 x 3/8 |
1.10 |
| A-1381 |
Hex Jam Nut 1/4 .20 |
1.45 |
| A-1382 |
Nut 3/8 .16 |
1.25 |
| A-1382-A |
Hex Nut 5/16 .18 |
1.25 |
| A-1384 |
RHMS Screw 1/4 .20 x 1/2 |
1.10 |
| A-1391 |
Flat HDMS 6/32 x 4 |
1.45 |
| A-1392 |
Button Head Sicket Screw 3/8 .16 x 3/4 |
1.55 |
| Parts for Twin Frame |
| A-1605 |
Slide Box Clamp Plate, Twin Head Machine |
13.90 |
| A-1606 |
Drive Guard, Twin Head Machine |
51.35 |
| A-1606-A |
R.H and L.H Guards, Price Each |
72.05 |
| A-1609-R |
Wire Spool Bracket, Right Side, Twin Head Stitcher |
88.95 |
| A-1609-L |
Wire Spool Bracket, Left Side, Twin Head Stitcher |
88.95 |
| A-1610 |
Feed Roll Shaft (2 required) L.H Shaft on R.H Side and R.H Shaft on R.H Side of New Style Head Plate A-2796-B and Standard 1 3/8" Crown |
81.00 |
| A-1611 |
Feed Roll Shaft, R.H Shaft on L.H Side of New Style Head Plate A-2796-B, Standard and 1 3/8" Crown, Also Twin Head Stitcher |
85.05 |
| A-1611-A |
Bronze Bushing |
24.10 |
| A-1612 |
Feed Roll Shaft, R.H Shaft on R.H Side of New Style Head Plate A-2796-B, Standard and 1 3/8" Crown, Twin Head Stitcher |
138.95 |
| A-1613 |
Feed Roll Shaft (3 required) R.H and L.h on Right Side and R.H on Left Side of New Style Head Plate A-2796-A, Arcate Wire, Twin Head Stitcher |
163.55 |
| A-1614 |
Feed Roll Shaft (1 required) L.H on Left Side of New Style head Plate A-2796-A, Arcuate Wire |
138.95 |
| A-1615 |
Back Gauge Table Clamp, 45 Degree Angle Head Stitcher |
33.05 |
| A-1616 |
Flange Bearing Plate, Twin Head Stitcher |
72.05 |
| A-1617 |
Flange Bearing Plate Stud, Twin Head Stitcher |
11.60 |
| A-1618 |
Flange Bearing Link Belt Bearing, Twin Head Stitcher |
82.60 |
| A-1619 |
Bushing, Idler Shaft for Head Plate A-27986-B, Twin Head Stitcher |
23.80 |
| A-1620 |
Feed Roll Drive Chain for head Plate A-27986-B ,Twin Head Stitcher |
34.34 |
| A-1621 |
Anvil Post Pivot Pin |
1.95 |
| A-1623 |
Drive Shaft for IBM Machine |
98.05 |
| A-1624 |
Drive Shaft for 42" Straight Arm Stitcher |
203.60 |
| A-1626 |
Drive Shaft 90 Degree Bench Machine |
147.25 |
| A-1634-A |
Reeves Tables (20H43) |
P.O.R |
| A-1634 |
Reeves Tables (25H115) |
P.O.R |
| A-1634-1 |
Hand Wheels Adjustment Twin Frame |
P.O.R |
| A-1634-2 |
Adjustable Base Plate |
P.O.R |
| A-1635 |
Adjustable Stand Base |
P.O.R |
| A-1635-4 |
Adjustable Table Plates |
P.O.R |
| A-1637 |
Micro Switch Trip Plate for Ecko #23 Bostich |
106.80 |
| A-1638 |
Micro Switch Trip Arm |
68.65 |
| B-1811 |
Bracket Spring |
5.20 |
| For All Parts in the 1911 Series, Specify Which Type |
| A-1911 |
Mounting Bracket for Push Button Switch, Standard Machine |
31.40 |
| A-1911-A |
Mounting Bracket for Push Button Switch, Wide Crown Machine |
31.40 |
| A-1911-B |
Mounting Bracket for Push Button Switch, R.H Narrow Crown Machine |
31.40 |
| A-1911-C |
Mounting Bracket for Push Button Switch, R.H Wide Crown Machine |
30.15 |
| A-1911-D |
Mounting Bracket for Push Button Switch, R.H or L.H for Use with 25# Coil Holder |
39.30 |
| A-1911-E |
Mounting Bracket, Wide Crown |
31.40 |
| A-1911-F |
Mounting Bracket, Twin Frame |
68.65 |
| A-1911-G |
Mounting Bracket, 20 Box |
68.65 |
| A-1912 |
L.H Finger Guard for Wide Crown Machines |
28.20 |
| A-1912-A |
R.H Fnger Guard for Wide Crown Machines |
36.15 |
| A-1913 |
Foot Pedal Guard for Post Machines |
108.30 |
| AA-1913 |
Foot Guard Complete |
214.55 |
| A-1913-1 |
Pedal Guard Supports |
106.20 |
| A-1914 |
Brace |
15.00 |
| A-1915 |
Support |
31.05 |
| A-1949 |
Support Plate |
31.05 |
| A-1950 |
Support Arm |
31.05 |
| A-1955 |
Washer |
1.10 |
| A-2300 |
Driver Bar with Square Pin, Twin Head Stitcher |
88.65 |
| A-2315 |
Former Housing, L.H with Square Pin, Twin Head Stitcher |
153.45 |
| Former and Driver with Square Pin for L.H Side of Twin Head Machine |
| AA-2315-D2 |
1/8" Crown, .103 Width Wire |
521.35 |
| AA-2315-E2 |
7/16" Crown, .103 Width Wire |
428.65 |
| AA-2315-E2A |
7/16" Crown, .103 Width Arcuate Wire |
436.60 |
| AA-2315-EO |
7/16" Crown, .028x.103 Wire |
420.60 |
| AA-2315-F2 |
1/2" Crown, .103 Width Wire |
444.55 |
| AA-2346 |
Former Cam with Stud A-1144, Twin Head Machine |
235.05 |
| A-2348 |
Cam Stud, Twin Head Machine (Same as A-1114) |
99.00 |
| AA-2349-B-RH-S |
Right Hand Wire Feed Tube (Short to 8") Specify Wire Size |
99.00 |
| AA-2349-C-LH-S |
Left Hand Wire Feed Tube (Short to 8") Specify Wire Size |
99.00 |
| AA-2349-B-RH-L |
Right Hand Wire Feed Tube (Long to 10 1/2") Specify Wire Size |
99.00 |
| AA-2349-B-LH-L |
Left Hand Wire Feed Tube (Long to 10 1/2") Specify Wire Size |
99.00 |
| A-2375-G |
Clincher Arm, Twin Head Stitcher |
412.35 |
| A-2393 |
Former Housing, R.H with Sqaure Pin, Twin Head Machine |
153.45 |
| Former and Driver Assembly with Square Pin for R.H Side of Twin Head Machine |
| AA-2393-D2 |
3/8" Crown, .103 Width Wire |
553.95 |
| AA-2393-E2 |
7/16" Crown, .103 Width Wire |
440.85 |
| AA-2393-E2A |
7/16" Crown, .103 Width Arcuate Wire |
448.90 |
| AA-2393-EO |
7/16" Crown, .028x.103 Wire |
432.35 |
| AA-2393-F2 |
1/2" Crown, .103 Width Wire |
462.60 |
| Dual Head Parts |
| A-2432 |
R.H Face Plate, Twin Head Stitcher |
85.65 |
| AA-2432 |
R.H Face Plate Complete, Twin Head Stitcher |
115.80 |
| A-2668 |
Head Plate Bushing, Twin Heads |
31.15 |
| A-2766 |
R.H Slide Box, Twin Head Stitcher |
187.55 |
| A-2766-EO |
R.H Slide Box, Twin Head Stitcher, .028 x.103 Wire |
187.55 |
| AA-2766 |
R.H Slide Box Assembled, Twin Head Stitcher |
289.00 |
| AA-2766-EO |
R.H Slide Box Assembled, Twin Head Stitcher, .028x.103 Wire |
289.00 |
| AAA-2766-E2 |
R.H Slide Box Complete with Face Plate, Former and Driver, Twin Head, .020x.103 Wire |
856.95 |
| AAA-2766-EO |
R.H Slide Box Complete with Face Plate, Former and Driver, Twin Head, .028x.103 Wire |
865.10 |
| A-2796 |
Head Plate, Twin Head, Once Piece |
1629.30 |
| A-2796-B |
Head Plate, Twin Head, New Style with Feed Wheel Hinges |
2322.40 |
| A-2798 |
L.H Slide Box, Twin Head |
187.50 |
| AA-2798 |
L.H Slide Box Complete, Twin Head |
289.00 |
| AA-2798-EO |
L.H Slide Box Complete, Twin Head, .028x.103 Wire |
289.00 |
| AAA-2798-E2 |
L.H Slide Box Complete, Twin Head, .020x.103 Wire with Face Plate, Former and Driver |
869.15 |
| AAA-2798-EO |
L.H Slide Box Complete with Face Plate, Former and Driver, .028x.103 Wire |
877.35 |
| A-2800 |
L.H Face Plate, Twin Head |
85.65 |
| AA-2800 |
L.H Face Plate, Complete, Twin Head |
109.35 |
| A-2850* |
Drive Shaft, 12" Machine, Twin Head |
137.00 |
| A-2850-20* |
Drive Shaft, 20" Machine, Twin Head |
153.45 |
| A-2850-25* |
Drive Shaft, 25" Machine, Twin Head |
169.70 |
| A-3050-12* |
Main Drive Shaft , 20 Box Head, 12" Ideal Frame |
181.55 |
| A-3050-20* |
Main Drive Shaft, 20 Box Head, 20" Ideal Frame |
147.45 |
| *Add $ 15.70 for A-1099-B Shaft, End Collar |
| A-3075 |
Anvil Spring |
8.60 |
| A-3076 |
Anvil Stud for A-3075 Spring |
12.50 |
| F-3994 |
Brake Adjustment Level Spring |
1.75 |
| A-4592-B |
Toggle Lever Spring Pin |
2.00 |
| WSA-8300 |
Driver, 1 3/8" Wide Crown Stitcher |
118.76 |
| WSA-8304-1 |
Cutter Blade, Wide Crown Stitcher 1/4" Thick-110.69 |
21.20 |
| WSA-8304-2 |
Cutter Blade, Wide Crown Stitcher 5/16" Thick-110-103 |
21.20 |
| WSA-8304-3 |
Cutter Blade, Wide Crown Stitcher, 3/8" Thick-110-76 |
24.60 |
| 110-69 |
1/4" Cutter Blade for .028x.103 Flat Wire |
21.20 |
| 110-563 |
3/16" Cutter Blade for Arc Machine |
22.25 |
| 110-569 |
1/4" Cutter Blade for Arc Machine |
22.25 |
| 202-188 |
Cutter Blade Screw to be Used with 1 1/4" and 1 3/8" Wide Crown Machine |
1.50 |
| WSA-8305 |
Anvil 1 3/8" Wide Crown Stitcher |
74.10 |
| WSA-8309 |
Supporter, 1 3/8" Wide Crown Stitcher |
34.80 |
| WSA-8315 |
Former with Pin and Roller, 1 3/8" Wide Crown Stitcher |
210.95 |
| WSAA-8315 |
Former and Driver Complete with Cutter Blade, Screws, Roller and Pin, 1 3/8" Wide Crown Stitcher |
362.75 |
| WSA-8316 |
Cutter Tube, 1 3/8" Crown Stitcher, .037x.074 Wire |
19.10 |
| WSA-8317 |
Cutter Tube Clamp, 1 3/8" Wide Crown Stitcher |
19.25 |
| A-8329 |
L.H Feed Wheel, Above Serial No. A-7900 |
34.80 |
| WSA-8346 |
Former Cam, Wide Crown Stitcher |
204.65 |
| A-8348 |
Former Cam Pin 9/16" |
12.75 |
| WSA-8349 |
Wire Guide |
65.60 |
| WSA-8375-12 |
Clincher Arm, 12" Wide Crown Stitcher |
244.95 |
| WSAA-8375 |
12" Clincher Arm Complete with Bracket A-423-A |
528.40 |
| WSA-8376 |
Clincher Arm Clamp, Wide Crown Stitcher |
28.35 |
| A-8435-A |
R.H Head Plate with A-668 and A-8435-A-1, After Serial No. A-7900 |
384.65 |
| AAA-8435 |
R.H Stitcher Head (Includes Feed Rolls, Gears, Wire Check, Wire Feed Tube, Former Cam, Slide Box, Face Plate, Former and Driver) Assembled Complete for 7/16 or 1/2" Crown, .020x.103 Wire. (Does Not Include Drive Shaft, Coil Holder Bracket, Head Gear, or Cam Cover. |
1902.85 |
| A-8435-A1 |
R.H Feed Roll Hinge, After Serial No. A-7900 |
85.65 |
| WSA-8437 |
Clincher Block, 1 3/8" Wide Crown Stitcher |
34.65 |
| WSA-8437-A |
Clincher Block for Shallow Clinch |
44.10 |
| WSA-8476-E |
Clincher Arm, 20" Wide Crown Stitcher |
308.00 |
| WSAA-8476-E |
Clincher Complete, 20" with Bracket A-423-A |
605.40 |
| A-8796-A |
Standard l.H Head Plate with A-668, After Serial no. A-7900 with Hinge A-8769-A-1 |
384.65 |
| AAA-8796-A |
L.H Stitcher Head (Includes Feed Rolls, Gears, Wire Check, Wire Feed Tube, Former Cam, Slide Box, Face Plate, Former and Driver) Assembled Complete for 7/16 or 1/2" Crown, .020x.103 Wire. (Does Not Include Drive Shaft, Coil Holder Bracket, Head Gear, or Cam Cover. |
1841.50 |
| WSAAA-8796-A-1 |
L.H Stitcher Head (Includes Feed Rolls, Gears, Wire Check, Wire Feed Tube, Former Cam, Slide Box, Face Plate, Former and Driver) Assembled Complete for 1 3/8" Crown, .037x.074 Wire. (Does Not Include Drive Shaft, Coil Holder Bracket, Head Gear, or Cam Cover. |
2002.20 |
| UAAA-8769-A |
L.H Stitcher Head (Includes Feed Rolls, Gears, Wire Check, Wire Feed Tube, Former Cam, Slide Box, Face Plate, Former and Driver) Assembled Complete for 1 1/4" Crown, .020x.103 Arc Wire. (Does Not Include Drive Shaft, Coil Holder Bracket, Head Gear, or Cam Cover. |
2383.45 |
| UA-8796-A |
Standard L.H Head Plate with A-668, After Serial No. A-7900 (Has Bronze Bushing in Fedd Roll Shaft Holes with Hinge A-8769-A-1 for Arcuate Wire) |
433.70 |
| A-8796-A1 |
L.H Feed Roll Hinge, After Serial No. A-7900 |
85.65 |
| UA-8796-A-1 |
L.H Feed Roll Hinge with Bushing |
141.70 |
| UA-8798-U-35 |
Slide Box, 1 1/4" Crown, .037x.074 Wire |
179.30 |
| WSA-8798 |
Slide Box, 1 3/8" Crown, .037x.074 Wire |
166.05 |
| UA-8798-U |
Slide Box, 1 1/4" Wide Crown Stitcher, .103 Wide Wire |
166.05 |
| WSAAA-8798 |
Slide Box Complete ( Add $26.85 for A-1912 Finger Guard) |
815.15 |
| UAAA-8798-A |
Slide Box Complete ( Add $20.85 for A-1912 Finger Guard) |
864.15 |
| UAA-8800-U-2 |
Face Plate Assembly, 1 1/4" Crown .020x.103 Wire |
226.40 |
| UAA-8800-U-35 |
Face Plate Assembly, 1 1/4" Crown, .037x.074 Wire |
226.40 |
| WSA-8800 |
Face Plate, 1 3/8" or 1 1/4" Wide Crown Stitcher |
67.25 |
| WSAA-8800 |
Face Plate, Complete with Anvil Assembly |
226.40 |
|
|
|
|
NOTE: PARTS NOT LISTED MAY STILL BE AVAILABLE, PLEASE CALL US FOR ASSISTANCE |
|
|
|
|
P.O.R = Price On Request |
Pricing is subject to change without prior notification.
